HNZXIB
HNZXIB R1050 50L Rotary Evaporator 220V Set with Chiller and Vacuum Pump
A 50-litre rotary evaporator set with a -30 °C chiller and five-tap vacuum pump for solvent distillation and recovery
- TypeRotary Evaporator
- Capacity50L
- Voltage220V
- 50L capacity processes large batches in a single run
- Vertical double-coil condenser recovers solvent at up to 19L/h for alcohol
- 30°C chiller maintains low-temperature condensation for heat-sensitive compounds
- Electric lift with 180mm stroke enables safe flask positioning without manual strain
- Large LCD touch display gives direct control over rotation speed, temperature and lift
50L Rotary Evaporator System
The HNZXIB R1050 is a 50 litre rotary evaporator supplied as a complete 220V set with a DLSB50-30 chiller and an SHZ-C(5) water circulating vacuum pump. It provides a rotating flask capacity of 50L and a receiving flask capacity of 20L for solvent recovery. A vertical double coil condenser with main and sub sections supports evaporation rates of at least 9L/h for water and 19L/h for alcohol. The stainless steel bath includes a silicone layer for insulation and anti-scalding protection.
Laboratories needing high-throughput distillation
This system suits facilities that require large batch processing with electric and manual lift options across a 180mm stroke. The LCD touch display simplifies parameter control during operation. It is not intended for users who only need small benchtop volumes or single flask capacities below 50L. Buyers without access to three phase 220-240V or 380V 60Hz power supplies should look at alternative equipment.
50L capacity with 20L collection headroom
The 50L rotating bottle comfortably handles large scale concentration and purification of temperature sensitive biologics. The 20L receiving bottle provides matching headroom for condensed solvent collection during extended runs. Evaporation capacity reaches at least 9L/h for water and 19L/h for alcohol under standard conditions. The 4kW total power draw at 220-240V defines the upper limit for continuous high rate operation.
Highlights
- 50L capacity processes large batches in a single run
- Vertical double-coil condenser recovers solvent at up to 19L/h for alcohol
- 30°C chiller maintains low-temperature condensation for heat-sensitive compounds
- Electric lift with 180mm stroke enables safe flask positioning without manual strain
- Large LCD touch display gives direct control over rotation speed, temperature and lift
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 50L |
| Voltage | 220V |
Questions about this item
Does the R1050 need a three-phase 220-240V or 380V supply at 60Hz to run?
The R1050 operates on a three-phase 220-240V or 380V supply at 60Hz, drawing 4KW total power. The chiller DLSB50-30 and vacuum pump SHZ-C(5) are also rated for 220V.
Can I keep my existing single-phase 220V lab circuit for this evaporator?
No, the R1050 requires a three-phase 220-240V or 380V connection at 60Hz. A standard single-phase 220V circuit will not supply the required 4KW whole power.
How do I confirm the system is evaporating at the rated speed after setup?
Check the LCD touch display for evaporation rates. The spec lists water >= 9L/h and alcohol >= 19L/h through the vertical double-coil condenser when the stainless-steel bath is heated.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
