HNZXIB
HNZXIB R1005 5L Rotary Evaporator with -10°C 10L Chiller
A 5 L rotary evaporator with electric lift, digital speed control up to 140 RPM and a 10 L chiller reaching -10 °C for solvent recovery
- TypeRotary Evaporator
- CapacityRotating Flask
- Voltage220V
- 5 L rotary flask processes large solvent volumes
- Electric lift adjusts bath height from 0 to 100 mm
- Digital speed control runs motor from 20 to 140 rpm
- Vertical double-coil condenser recovers over 2 L/h water or 4 L/h alcohol
- Included 10 L chiller cools circulation fluid down to -10 °C
Laboratory distillation system
The HNZXIB R1005 combines a 5L rotary evaporator with a 10L circulating chiller that reaches -10°C. The evaporator uses a vertical double-coil condenser and electric lift with a 0–100 mm stroke. Digital frequency-conversion control adjusts rotation speed from 20 to 140 RPM. The package suits laboratories that need continuous solvent recovery and concentration of heat-sensitive biologicals.
Thermals noise and power draw
Whole power consumption is 2.0 kW on a single-phase 220V/50Hz supply. The chiller maintains temperatures down to -10°C while the stainless-steel water bath heats the rotating flask. Evaporation rates exceed 2 L/h for water and 4 L/h for alcohol. Optimum ambient temperature range is 5–35°C. Teflon and fluorine rubber double seals contain vapours during normal operation.
Build integration and clearance
Outline dimensions are 660×400×1020 mm, so bench depth and ceiling height must accommodate this footprint. Electric lift frees the operator from manual flask handling and enables non-stop discharge of collected liquid. The 5000 ml rotating flask capacity determines batch size. Wooden crate packaging protects glassware during transit. Buyers needing larger batch volumes or lower condenser temperatures will require a different system.
Highlights
- 5 L rotary flask processes large solvent volumes
- Electric lift adjusts bath height from 0 to 100 mm
- Digital speed control runs motor from 20 to 140 rpm
- Vertical double-coil condenser recovers over 2 L/h water or 4 L/h alcohol
- Included 10 L chiller cools circulation fluid down to -10 °C
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | Rotating Flask |
| Voltage | 220V |
Questions about this item
How do I install the R1005 rotary evaporator and what step is commonly missed?
Place the unit on a stable bench, connect the 220V/50Hz supply, attach the vertical double-coil condenser, fit the 5L rotating flask, fill the stainless-steel water bath, then verify the PTFE and fluorine-rubber double seal seats evenly before starting the 20–140 RPM motor.
What maintenance or replacement will the R1005 and its 10L chiller need later?
Inspect the PTFE and fluorine-rubber double rotating seal regularly and replace it when wear appears; clean the vertical double-coil condenser and 5L rotating flask after each run; check the chiller’s 5L tank fluid level and top up with compatible heat-transfer fluid as needed.
What limit appears first during sustained use of the R1005 with the -10°C chiller?
The chiller’s -10°C floor is reached first; once the 5L tank can no longer remove heat fast enough, condensation in the vertical double-coil condenser drops off and evaporation slows below the rated 2L/h water or 4L/h alcohol rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
