HNZXIB
HNZXIB R1005 5L Rotary Evaporator 110V with -20°C Chiller
A 5-litre rotary evaporator with electric lift, digital speed control up to 140 rpm and a circulating chiller that reaches −20 °C, powered by 110 V
- TypeRotary Evaporator
- CapacityRotating Flask
- Voltage110V/60Hz
- 5 L rotating flask handles large-volume distillation
- Electric lift with 100 mm stroke simplifies flask positioning
- Digital frequency-conversion control delivers 20–140 rpm precision
- Vertical double-coil condenser maximises solvent recovery
- Included -20 °C circulating chiller maintains low-temperature condensation
5 L Rotary Evaporator with -20 °C Chiller
The HNZXIB R1005 is a 5 L rotary evaporator paired with a circulating chiller that reaches -20 °C. It operates on 110 V 60 Hz power and features electric lifting with a 100 mm stroke. The system includes a vertical double-coil condenser and a stainless-steel water bath for solvent recovery.
Suits labs needing 5 L batch distillation
This unit serves facilities that require a 5000 ml rotating flask and sub-ambient cooling down to -20 °C for heat-sensitive biologics. It is not intended for users who need larger flask volumes, higher evaporation rates than 2 L/h for water or 4 L/h for alcohol, or operation outside the 5–35 °C ambient range.
Fits on a bench with 660×400 mm footprint and 1020
The main body measures 660×400×1020 mm and draws 2.0 kW total power. Digital frequency-conversion speed control runs the 100 W motor from 20 to 140 RPM. A PTFE and fluorine-rubber double seal and non-stop discharge function reduce manual intervention during continuous runs.
Highlights
- 5 L rotating flask handles large-volume distillation
- Electric lift with 100 mm stroke simplifies flask positioning
- Digital frequency-conversion control delivers 20–140 rpm precision
- Vertical double-coil condenser maximises solvent recovery
- Included -20 °C circulating chiller maintains low-temperature condensation
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | Rotating Flask |
| Voltage | 110V/60Hz |
Questions about this item
What power supply and water connection do I need for the 5 L rotary evaporator and the -20 °C chiller?
Both units run on single-phase 110 V 60 Hz; the evaporator draws 2.0 kW total and the chiller has a 5 L tank that must be filled with coolant before use.
Can I keep my existing vertical double-coil condenser and 5 L rotating flask when upgrading to this R1005 system?
The R1005 includes its own vertical double-coil condenser and 5000 ml flask, so you would use the supplied glassware rather than older pieces.
How do I verify the R1005 and DLSB5/20 are operating correctly after installation?
Confirm the digital panel shows 20–140 rpm speed control, the electric lift moves 0–100 mm, the water bath heats, and the chiller reaches -20 °C while the condenser recovers solvent.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
