HNZXIB
HNZXIB GYY-50L 50L laboratory supply 200°C 5.5 kW 220V
A 50 L stainless-steel oil bath with digital PID control circulates fluid at 20–25 L/min up to 200 °C using 5.5 kW at 220 V
- TypeWater/Oil Bath
- Temperature RangeRT~200°C
- Capacity50L
- Voltage220V
- 50 L capacity handles large sample batches
- 200 °C maximum temperature covers demanding thermal protocols
- 5 kW heating power delivers rapid heat-up
- 20–25 L/min circulation flow ensures uniform temperature distribution
- Digital PID control provides precise temperature stability
50 L oil bath with circulation
The HNZXIB GYY-50L is a 50 L water or oil bath that provides a thermostatic circulation heat source up to 200 °C. It operates on 220 V with a 5.5 kW heating element and a stainless-steel magnetic pump delivering 20 to 25 L/min at 1.45 MPa. The tank is constructed from imported stainless steel with an insulated shell and digital PID temperature control.
Laboratories needing heated fluid circulation
This unit suits labs that require a mobile, high-temperature bath with integrated circulation for external apparatus. It is not for users who only need a static bath without pumping, or for processes demanding temperatures above 200 °C. Buyers without a 220 V supply or who need a smaller reservoir should consider other options.
5.5 kW heating power at 220 V
The 5.5 kW heater draws approximately 10 A on a 220 V 50/60 Hz circuit, setting the electrical installation requirement. Solid-state relay switching and a vertical frame on castors complete the package.
Highlights
- 50 L capacity handles large sample batches
- 200 °C maximum temperature covers demanding thermal protocols
- 5 kW heating power delivers rapid heat-up
- 20–25 L/min circulation flow ensures uniform temperature distribution
- Digital PID control provides precise temperature stability
Specifications
| Type | Water/Oil Bath |
|---|---|
| Temperature Range | RT~200°C |
| Capacity | 50L |
| Voltage | 220V |
Questions about this item
How hot does the bath actually run in daily use?
The unit reaches a no-load maximum of 200 °C and the digital PID controller holds the set point within a tight band during circulation.
What does the 1.45 MPa cycling pressure mean for my setup?
It is the pump's rated discharge pressure; with 20–25 L/min flow it will push fluid through typical laboratory glassware and jacketed reactors without stalling.
Will the 50 L tank fit through a standard lab door?
The vertical frame sits on castors for mobility; allow clearance for a 50 L stainless vessel plus insulation and the external pump housing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
