HNZXIB
HNZXIB GYY-10L 10 L 200 °C laboratory supply
10 L thermostatic circulator provides water or oil bath heating from room temperature to 200 °C with a 3.5 kW heater and sealed magnetic pump delivering 15–20 L/min flow at 1.45 MPa on 220 V power
- TypeWater/Oil Bath
- Temperature RangeRT~200°C
- Capacity10L
- Voltage220V
- Thermostatic circulation for stable lab heating
- 10 L capacity handles medium-scale experiments
- 5 kW heating reaches 200 °C no-load maximum
- Sealed magnetic pump cycles at 15-20 L/min flow
- Digital control covers water bath to 99 °C and oil bath to 250 °C
10 L thermostatic circulator
The HNZXIB GYY-10L is a 10 L laboratory water and oil bath that delivers a temperature range of RT to 200 °C under digital control. It provides a sealed magnetic pump circulation system with a flow rate of 15 to 20 L/min and a cycling pressure of 1.45 Mpa. The unit operates on 220 V 50/60 Hz supply with a 3.5 kW heating element drawing 10 A.
Suits labs needing external circulation
This circulator suits laboratories that require a thermostatic heat source for external apparatus such as reactors or condensers. The sealed magnetic pump enables closed-loop operation without shaft seals. Buyers who need a no-load maximum temperature above 200 °C or a reservoir volume larger than 10 L should look at other equipment. The 14-day wooden-case delivery window also makes it unsuitable for urgent same-week requirements.
Wooden case and one-year coverage
The unit ships in a wooden crate rated for 7 to 14 working days transit, which protects the reservoir and pump during freight. A one-year manufacturer warranty covers defects in the heating element, pump and digital controller. No additional software, tubing or fittings are included in the package, so users must source compatible circulation hoses and clamps separately.
Highlights
- Thermostatic circulation for stable lab heating
- 10 L capacity handles medium-scale experiments
- 5 kW heating reaches 200 °C no-load maximum
- Sealed magnetic pump cycles at 15-20 L/min flow
- Digital control covers water bath to 99 °C and oil bath to 250 °C
Specifications
| Type | Water/Oil Bath |
|---|---|
| Temperature Range | RT~200°C |
| Capacity | 10L |
| Voltage | 220V |
Questions about this item
What power supply do I need to run the 3.5 kW heating element?
The unit requires a 220 V 50/60 Hz supply rated for at least 10 A to deliver the 3.5 kW heating power.
Can I keep using my current glassware if it is only rated to 200 °C?
The oil-bath mode reaches 250 °C, so glassware limited to 200 °C should only be used in water-bath mode where the maximum is 99 °C.
How can I verify the pump is circulating at the specified 15-20 L/min after installation?
Check the flow indicator on the sealed magnetic pump; a steady reading within the 15-20 L/min range confirms the circulator is operating as designed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
