HNZXIB
HNZXIB F-2L 2L Glass Reactor 110V 60W 1000rpm 0.65kW 350°C laboratory supply
A 2 L single-layer borosilicate glass reactor with a 60 W stirrer adjustable to 1 000 rpm, a 0.65 kW heating mantle reaching 350 °C, and PTFE seals holding –0.095 MPa vacuum
- TypeGlass Reactor
- Capacity2L
- Voltage110V
- Borosilicate GG17 glass resists thermal shock and chemical attack
- PTFE sealing system achieves approximately -0.095 MPa vacuum for contamination-free runs
- Variable-speed agitator delivers 0-1000 rpm with 2400 g·cm torque for smooth, spark-free mixing
- Integrated 0.65 kW heating mantle maintains precise temperatures up to 350 °C
- Stainless-steel frame provides corrosion-resistant support for continuous laboratory operation
2 L single-layer glass reactor
The HNZXIB F-2L is a bench-scale reaction vessel built from borosilicate glass (GG17). It combines a 0.65 kW heating mantle with a 60 W overhead stirrer for temperature-controlled synthesis. The PTFE sealing system holds vacuum to roughly -0.095 MPa during operation. Stainless steel framework supports the assembly for daily laboratory use.
Suited for atmospheric and vacuum synthesis
Chemists running distillations, refluxes or stirring reactions up to 350 °C will find the 2 L capacity and 0–1000 rpm range appropriate. The single-layer wall means no jacketed cooling, so exotherms requiring rapid heat removal need a different vessel. Buyers who want more volume or a double-wall design should look at other models.
Maximum working temperature 350 °C
The heating mantle is rated for continuous use from room temperature to 350 °C, which sets the upper limit for any reaction protocol. All other specifications — stirring torque, vacuum depth, voltage — are secondary to this thermal ceiling. Confirm your chemistry stays below this temperature before purchasing.
Highlights
- Borosilicate GG17 glass resists thermal shock and chemical attack
- PTFE sealing system achieves approximately -0.095 MPa vacuum for contamination-free runs
- Variable-speed agitator delivers 0-1000 rpm with 2400 g·cm torque for smooth, spark-free mixing
- Integrated 0.65 kW heating mantle maintains precise temperatures up to 350 °C
- Stainless-steel frame provides corrosion-resistant support for continuous laboratory operation
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 2L |
| Voltage | 110V |
Questions about this item
How do I install the heating mantle and what step is often missed?
Place the 2L borosilicate glass vessel into the heating mantle, connect to 110V 50/60Hz supply, then fit the PTFE seal assembly with the debris collecting trough to achieve the rated -0.095 MPa vacuum.
Which parts will need replacement after extended use?
The PTFE sealing components and the debris collecting trough wear over time; the stirring shaft seal should be inspected regularly to maintain the -0.095 MPa vacuum rating.
What limit appears first during continuous high-temperature stirring?
The heating mantle's 0.65 kW output caps the vessel at 350 °C, while the motor's 2400 g·cm torque limits sustained stirring load at speeds up to 1000 rpm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
