We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent 20L borosilicate glass reactor vessel on stainless steel frame with heating mantle and agitator

HNZXIB

HNZXIB F-20L 20L Glass Reactor 220V 4.5kW 250°C laboratory supply

SKU CH-63RT-5VP20 MPN F-20L

A 20 L single-layer borosilicate glass reactor with water or oil bath heating to 250 °C, PTFE-sealed vacuum to -0.095 MPa, and 60–600 rpm stirring driven by a 120 W motor delivering 1200 g·cm torque

  • TypeGlass Reactor
  • Capacity20L
  • Voltage220V
  • Borosilicate GG17 glass resists thermal shock and chemical attack
  • PTFE sealing achieves -0.095 MPa vacuum for air-sensitive reactions
  • 5 kW heating mantle reaches 250 °C for high-temperature synthesis
  • Frequency-controlled stirrer delivers 60–600 rpm with 1200 g·cm torque
  • Stainless-steel frame provides corrosion-resistant support for 20 L vessel

20 L Single-Layer Glass Reactor

The HNZXIB F-20L is a 20 L single-layer glass reactor built for laboratory synthesis, distillation and reflux work. It operates on a 220 V supply and uses a 4.5 kW water or oil bath to reach temperatures up to 250 °C. The vessel is fabricated from GG17 borosilicate glass for broad chemical resistance.

Integration with heating mantle and vacuum line

The reactor requires a compatible water or oil heating mantle and a vacuum source capable of reaching roughly -0.095 MPa to perform negative-pressure reactions. Its stainless-steel frame provides structural support and corrosion resistance on the bench. The integrated agitator delivers 60 to 600 rpm with 1200 g·cm torque, removing the need for a separate overhead stirrer.

PTFE sealing components and debris trough

Proprietary PTFE sealing components maintain the deep vacuum level without contamination. A built-in debris collecting trough catches particulate matter during reactions, simplifying cleanup between runs. The 120 W stirring motor runs on 110 V at 50/60 Hz, so an appropriate supply or transformer must be provided for the agitator circuit.

Highlights

  • Borosilicate GG17 glass resists thermal shock and chemical attack
  • PTFE sealing achieves -0.095 MPa vacuum for air-sensitive reactions
  • 5 kW heating mantle reaches 250 °C for high-temperature synthesis
  • Frequency-controlled stirrer delivers 60–600 rpm with 1200 g·cm torque
  • Stainless-steel frame provides corrosion-resistant support for 20 L vessel

Specifications

TypeGlass Reactor
Capacity20L
Voltage220V

Questions about this item

How long can the 4.5 kW heating mantle run at 250 °C before the oil bath or seals become the limiting factor?

The unit is rated for continuous operation up to 250 °C using the water or oil bath mantle; sustained runs at that temperature are limited by the oil’s thermal stability and the PTFE seal integrity.

What noise level and heat output should I expect when the agitator runs at 600 rpm all day?

The frequency-controlled motor delivers smooth, spark-free torque at 600 rpm with minimal acoustic emission; the stainless frame dissipates motor heat, while the bath handles the 4.5 kW thermal load.

Which utilities and consumables must be on site before the 20 L reactor can operate?

You need a 220 V supply for the 4.5 kW mantle, a 110 V circuit for the 120 W stirrer, a water or oil bath fluid, and a vacuum source capable of reaching –0.095 MPa.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.