HNZXIB
HNZXIB F-1L 1L Glass Reactor 110V 0.53kW Mantle 350°C 1000rpm laboratory supply
A 1 L borosilicate glass reactor with a 0.53 kW heating mantle reaches 350 °C and stirs at up to 1000 rpm under −0.095 MPa vacuum
- TypeGlass Reactor
- Capacity1L
- Voltage110V
- Borosilicate GG17 glass resists thermal shock and chemical attack
- PTFE seals achieve -0.095 MPa vacuum for contamination-free reactions
- Heating mantle delivers 0.53 kW up to 350 °C
- Variable-speed stirrer runs 0-1000 rpm with 2000 g·cm torque
- Stainless-steel frame provides corrosion-resistant structural support
1 Litre Glass Reactor for Laboratory Synthesis
The HNZXIB F-1L is a single-layer glass reactor designed for biochemical and synthesis reactions such as distillation, reflux and stirring under constant temperature conditions. It suits laboratory technicians and researchers who require a transparent reaction vessel with integrated heating and agitation for high-temperature processes.
Check Voltage and Vacuum Requirements Before Use
The unit operates on a 110V supply at 50 or 60 Hz and achieves a vacuum level of approximately -0.095 MPa via PTFE sealing components. Ensure your laboratory power matches this voltage and that your vacuum line can interface with the proprietary seal design to maintain the stated negative pressure during operation.
Heating Mantle and Agitator Enable Controlled
A 0.53 kW heating mantle provides a working temperature range from room temperature up to 350 °C, while the frequency-controlled motor delivers 0 to 1000 rpm stirring speed with 2000 g·cm torque. The borosilicate glass construction resists thermal shock and chemical attack, and a debris collecting trough helps keep the vessel clean during extended runs.
Highlights
- Borosilicate GG17 glass resists thermal shock and chemical attack
- PTFE seals achieve -0.095 MPa vacuum for contamination-free reactions
- Heating mantle delivers 0.53 kW up to 350 °C
- Variable-speed stirrer runs 0-1000 rpm with 2000 g·cm torque
- Stainless-steel frame provides corrosion-resistant structural support
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 1L |
| Voltage | 110V |
Questions about this item
What items are included with the F-1L reactor and what must be purchased separately?
The package supplies the 1 L borosilicate glass vessel, PTFE sealing components, a 0.53 kW heating mantle, a 60 W stirring motor rated to 1000 rpm, a debris collecting trough and the stainless-steel frame. Vacuum pump, temperature controller, coolant circulator and glassware adapters are not included.
How do I decide between the 110 V model and other voltage options for the F-1L?
This unit is built for 110 V, 50/60 Hz mains only; no other voltage variant is offered in the supplied data. Choose it when your laboratory supply matches 110 V.
What does the 350 °C temperature range mean for daily operation of the F-1L?
The mantle can heat the 1 L reaction volume from room temperature up to 350 °C, while the stirrer delivers 2000 g·cm torque across 0-1000 rpm and the PTFE seals maintain vacuum to roughly -0.095 MPa throughout that range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
