We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular stainless steel vacuum drying oven with digital control panel and door handle

HNZXIB

HNZXIB DZF-6010 Vacuum Drying Oven 55L 1.9 Cu Ft 110V 1400W Stainless Steel Chamber

SKU CH-KDB0-CWQS2 MPN DZF-6010

A 55-litre vacuum drying oven with a 304 stainless-steel chamber, digital PID control to 480 °F (±1 °F) and 1400 W heating on 110 V power

  • TypeHNZXIB Vacuum Drying Oven 1.9 Cu Ft 55L Digital Heating Dryi
  • FinishHNZXIB Vacuum Drying Oven 1.9 Cu Ft 55L Digital Heating Dryi
  • 55 L capacity handles larger batches
  • 110 V 1400 W power for fast heat-up
  • ±1 °F uniformity from PID controller
  • 304 stainless steel chamber resists corrosion
  • Vacuum hold verified for 48 hours

55 L Vacuum Drying Oven

The HNZXIB DZF-6010 is a 55 L vacuum drying oven built for laboratories and production units that process heat-sensitive or oxidation-prone materials. It operates on a 110 V 60 Hz supply and draws 1400 W. A 5 mm SUS304 stainless steel chamber provides a rectangular interior that maximises usable volume. The unit is new and designed for drying, baking, heat-treatment and disinfection tests.

Suited for labs needing precise low-temperature

Researchers who require stable vacuum levels, uniform heating to 480 °F (249 °C) and the option to backfill with inert gas will benefit from the PID-controlled microcomputer controller and one-piece silicone door seal. The oven maintains temperature uniformity within +/- 1 °F and holds vacuum for 48 hours after the pump and valve are closed. Facilities that need a higher voltage supply or a different chamber capacity should evaluate alternative equipment.

Temperature uniformity of +/- 1 °F to 480 °F

The MCU-based PID controller keeps the chamber within +/- 1 °F across the full range up to 480 °F (ca. 249 °C). Natural convection combined with a separate fan switch delivers even drying without overshoot. This uniformity specification is the key factor in deciding whether the oven meets a specific test protocol.

Highlights

  • 55 L capacity handles larger batches
  • 110 V 1400 W power for fast heat-up
  • ±1 °F uniformity from PID controller
  • 304 stainless steel chamber resists corrosion
  • Vacuum hold verified for 48 hours

Specifications

TypeHNZXIB Vacuum Drying Oven 1.9 Cu Ft 55L Digital Heating Drying Oven Stainless Steel Vacuum Chamber
BrandHNZXIB
ModelDZF-6050
FinishHNZXIB Vacuum Drying Oven 1.9 Cu Ft 55L Digital Heating Drying Oven Stainless Steel Vacuum Chamber
Part NumberDZF-6050

Questions about this item

Does the DZF-6010 require a separate vacuum pump to reach the stated vacuum level?

Yes, the oven must be connected to an external vacuum pump and valve; the 5 mm SUS304 chamber and one-piece silicone gasket are rated to hold vacuum for 48 hours after the pump is closed.

Can I operate the 110 V, 1400 W oven on the same circuit as older 110 V lab equipment without tripping the breaker?

The unit draws 1400 W at 110 V 60 Hz; verify that the combined load of all devices on the circuit stays within the branch-circuit rating before adding the oven.

How do I confirm the chamber is holding temperature uniformly after the PID controller reaches the set point?

The LCD shows multi-group data; when the reading stabilises within ±1 °F of the target up to 480 °F, the advanced PID algorithm is maintaining uniformity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.