HNZXIB
HNZXIB DFY-10/30 10L -30°C to 98°C laboratory supply
A 10 L circulating bath heats or cools fluid from -30 °C to 98 °C with ±0.1 °C accuracy and a 20 L/min pump
- TypeWater/Oil Bath
- Temperature Range-30°C~98°C
- Speed20L/min
- Capacity10L
- Voltage110V
- Precise temperature control with ±0.1°C accuracy
- Wide operating range from -30°C to 98°C
- 10 L bath capacity for larger sample volumes
- 20 L/min circulating pump flow for external equipment
- 110 V power supply for standard laboratory outlets
10 L laboratory circulator
The HNZXIB DFY-10/30 is a 10 L water and oil bath that both heats and cools the working fluid before pumping it to external apparatus. It serves researchers in biology, physics, medicine and chemistry who need a stable low-temperature source without using dry ice or liquid nitrogen. The integrated magnetic stirrer operates in two stages to improve temperature uniformity throughout the stainless-steel tank.
Temperature range and flow limits
The unit delivers an adjustable no-load range from -30 °C to 98 °C with a control accuracy of ±0.1 °C. Its circulating pump moves up to 20 L/min through an opening of 285 mm, while the refrigeration system provides between 1022 W and 1956 W of cooling capacity. Operation requires a 110 V 60 Hz supply.
±0.1 °C stability decides suitability
The single specification that determines whether this bath fits the application is the constant-temperature accuracy of ±0.1 °C. Protocols demanding tighter uniformity will need a different instrument; workflows that tolerate wider drift can use simpler equipment.
Highlights
- Precise temperature control with ±0.1°C accuracy
- Wide operating range from -30°C to 98°C
- 10 L bath capacity for larger sample volumes
- 20 L/min circulating pump flow for external equipment
- 110 V power supply for standard laboratory outlets
Specifications
| Type | Water/Oil Bath |
|---|---|
| Temperature Range | -30°C~98°C |
| Speed | 20L/min |
| Capacity | 10L |
| Voltage | 110V |
Questions about this item
Should I choose the 10 L DFY-10/30 or a different capacity for my low-temperature work?
This model provides a 10 L stainless steel tank with a 285 mm opening, a circulating pump rated at 20 L/min and a no-load range of -30 °C to 98 °C.
What does the -30 °C to 98 °C range mean once the bath is loaded with samples?
The quoted span applies with zero load; adding samples reduces cooling power from 1956 W down to 1022 W, so the achievable low end will be higher than -30 °C depending on heat load.
How does the 110 V supply and 20 L/min pump limit external circulation?
The unit runs on 110 V 60 Hz and delivers up to 20 L/min through the 285 mm aperture, capping the flow you can push to an external reactor or viscometer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
