HNZXIB
HNZXIB DFY-10/10 10L constant temperature bath -10°C to 98°C magnetic stirring
A 10 L water/oil bath circulates fluid at 20 L/min while maintaining ±0.1 °C accuracy from -10 °C to 98 °C, with built-in magnetic stirring for uniform temperature
- TypeWater/Oil Bath
- Temperature Range-10°C~98°C
- Speed20L/min
- Capacity10L
- Voltage110V
- Precise temperature control with ±0.1°C accuracy
- Wide operating range from -10°C to 98°C
- Integrated magnetic stirring for uniform temperature distribution
- 20 L/min circulating pump flow rate
- 10 L capacity with 285 mm opening diameter
Application and capacity
The HNZXIB DFY-10/10 is a 10 L constant-temperature bath that both heats and cools liquid from -10 °C to 98 °C under no-load conditions. It serves laboratories in scientific research, biology, physics, medicine and chemistry that need a stable thermal medium without using dry ice or liquid nitrogen. An integrated magnetic stirrer divided into two sections improves temperature uniformity throughout the stainless-steel tank.
Sustained-load behaviour
Temperature control holds to ±0.1 °C accuracy while the circulating pump delivers a steady 20 L/min flow. The refrigeration system provides a capacity range of 1814 W down to 884 W, allowing the bath to maintain set points during extended runs rather than only during short bursts. Magnetic stirring at the tank base continuously homogenises the fluid so gradients do not develop over time.
Interface and supply limits
The unit operates on a 110 V, 60 Hz supply and requires a 285 mm diameter opening for vessel access. Its 10 L storage volume and fixed pump rate define the maximum external loop volume and flow that can be supported without additional hardware. No other voltage, frequency or connector options are specified.
Highlights
- Precise temperature control with ±0.1°C accuracy
- Wide operating range from -10°C to 98°C
- Integrated magnetic stirring for uniform temperature distribution
- 20 L/min circulating pump flow rate
- 10 L capacity with 285 mm opening diameter
Specifications
| Type | Water/Oil Bath |
|---|---|
| Temperature Range | -10°C~98°C |
| Speed | 20L/min |
| Capacity | 10L |
| Voltage | 110V |
Questions about this item
How much power does the DFY-10/10 draw when running continuously at full cooling or heating capacity?
The unit's refrigerant capacity spans 1814 to 884 W, so sustained operation will draw power within that range depending on load and set temperature.
What power supply must already be available on the bench for the 110 V model to operate?
A 110 V, 60 Hz mains outlet is required; the bath plugs directly into standard laboratory voltage without additional transformers.
Will the 285 mm opening and 20 L/min pump accommodate the glassware and external circuits I already use?
The bath provides a 285 mm diameter aperture and a 20 L/min circulating pump, fitting common reactors and allowing closed-loop temperature control of existing apparatus.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
