HNZXIB
HNZXIB 80-1 Centrifuge 20 ml × 6 4000 rpm 220 V
A desktop centrifuge separates samples in six 20 ml tubes at up to 4000 rpm with a stainless steel liner and 0-60 minute timer
- TypeCentrifuge
- Voltage220V
- Separates cells and large particles at up to 4000 rpm
- Stainless steel liner resists corrosion and reduces noise
- Timer adjustable from 0 to 60 minutes for precise runs
- Holds six 20 ml tubes for routine lab workloads
- Compact 31.5 × 28 × 28.5 mm footprint fits tight benches
Desktop centrifuge for routine separation
The HNZXIB 80-1 is a low-speed benchtop centrifuge designed for standard laboratory workflows in biology, medicine and chemistry. It accommodates six 20 ml tubes and reaches a maximum speed of 4000 rpm, generating 1435 x g of centrifugal force. A stainless steel liner adds durability and helps reduce operational noise. The timer is adjustable from 0 to 60 minutes for flexible run times.
Suited for low-throughput cell and particle work
This unit fits labs that process small batches of samples for radioimmunoassay or similar separation tasks. Its 220 V, 50 Hz power requirement and 6.3 kg weight make it a fixed bench instrument rather than a portable device. Facilities needing higher speeds, larger rotor capacities or refrigerated operation should consider alternative equipment. The compact outer dimensions of 31.5 x 28 x 28.5 mm allow placement on crowded benches.
Steady performance within stated limits
Under continuous use the motor maintains the set speed up to the full 60 minute cycle without exceeding the 4000 rpm ceiling. Balanced loading is essential; the manual prohibits running the rotor in an unbalanced condition to protect both samples and the drive mechanism. The stainless steel chamber resists corrosion during repeated runs, and the simple mechanical timer avoids electronic drift over long sessions.
Highlights
- Separates cells and large particles at up to 4000 rpm
- Stainless steel liner resists corrosion and reduces noise
- Timer adjustable from 0 to 60 minutes for precise runs
- Holds six 20 ml tubes for routine lab workloads
- Compact 31.5 × 28 × 28.5 mm footprint fits tight benches
Specifications
| Type | Centrifuge |
|---|---|
| Voltage | 220V |
Questions about this item
What power supply does the 220 V centrifuge require to operate?
The unit runs on a 220 V, 50 Hz mains supply; the wall outlet must be rated above the machine's own ratings and properly grounded.
Can I use my existing 20 ml tubes with the 6-place rotor?
Yes, the rotor holds six 20 ml tubes; load them evenly opposite each other to keep the rotor balanced.
How do I verify the centrifuge is running correctly after installation?
Run the empty rotor at high speed for 1–2 minutes; if there is no abnormal vibration or noise the unit is ready for use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
