HNZXIB
HNZXIB 5L Rotary Evaporator RE-501 110V with Vacuum Pump SHZ-D(III)
A 5 L rotary evaporator with digital speed control up to 120 r/min, ±1 °C bath accuracy and a 1500 W water/oil bath, paired with a two-tap vacuum pump for efficient solvent recovery
- TypeRotary Evaporator
- Capacity5L
- Voltage110V
- 5 L evaporating flask and 3 L receiving flask handle large volumes
- 0–120 r/min digital speed control with 40 W motor for precise rotation
- 1500 W water/oil bath with ±1 °C accuracy ensures stable heating
- PTFE and fluoro-rubber seals plus high-borosilicate glass resist chemical attack
- Manual screw-rod lift offers 150 mm travel for flexible positioning
5L Rotary Evaporator System
The HNZXIB RE-501 combines a 5L evaporating flask with a 3L receiving flask and the SHZ-D(III) vacuum pump. It operates on 110V power with a US plug and includes a digital display for 0-120 r/min speed control. The package suits laboratory solvent concentration and purification tasks.
Sustained Operation Characteristics
A 1500W water/oil bath maintains temperature accuracy within ±1°C during extended runs. The 40W motor provides stepless speed regulation while the condenser achieves 0.098Mpa vacuum degree. Manual screw rod lifting offers 0-150mm height adjustment for continuous process control.
Construction and Daily Use
High borosilicate glassware pairs with PTFE and fluoro rubber sealing for corrosion resistance. The chassis uses stainless steel and aluminum alloy castings with a 28×17cm bath dimensions. CE and ISO certified, the unit ships in wooden case packaging for laboratory bench installation.
Highlights
- 5 L evaporating flask and 3 L receiving flask handle large volumes
- 0–120 r/min digital speed control with 40 W motor for precise rotation
- 1500 W water/oil bath with ±1 °C accuracy ensures stable heating
- PTFE and fluoro-rubber seals plus high-borosilicate glass resist chemical attack
- Manual screw-rod lift offers 150 mm travel for flexible positioning
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 5L |
| Voltage | 110V |
Questions about this item
How much power does the water bath and motor draw together when running all day at 110V?
The water bath is rated at 1500W and the motor at 40W, both on 110V.
What extra glassware or fittings must I already have to start distilling with the RE-501?
The unit ships with a 5L evaporating flask, 3L receiving flask and double reflux condenser; only standard joint clamps and tubing are needed.
Will the 28×17cm bath and 150mm lift clear my existing 2L and 10L flasks on the same bench?
The bath diameter is 28cm and the manual lift travels 150mm, so it accommodates a range of flask heights and sizes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
