HNZXIB
HNZXIB 50ml Stainless Steel High Pressure Reactor Autoclave PTFE Liner
A 50 ml stainless steel high-pressure reactor rated for 300 °C and 220 bar with a PTFE liner for corrosive media
- TypePressure Reactor
- Capacity50ml
- 50 ml capacity fits small-scale experiments
- PTFE liner resists acid and alkali corrosion
- Withstands 300 °C (572 °F) for high-temperature reactions
- Rated to 22 MPa (220 bar) for safe high-pressure operation
- Suitable for flammable, toxic or highly penetrative media
Capacity and Application
The HNZXIB 50ml stainless steel high pressure reactor autoclave provides a 50ml capacity for laboratory synthesis. It handles flammable, combustible, toxic or highly penetrative chemical media. The PTFE liner resists acid-alkali corrosion during reactions. This vessel suits researchers needing small-volume hydrothermal or solvothermal processing.
Thermal Limits and Pressure Rating
The reactor operates at temperatures up to 300°C (572°F) and withstands 22 MPa (220 Bar) of pressure. These ratings define the safe operating envelope for high-temperature digestion or crystallisation work. No active cooling or external power draw is specified for the vessel itself. Users must supply appropriate heating and monitoring equipment.
Construction and Daily Handling
The stainless steel body with a PTFE inner liner delivers chemical compatibility for aggressive reagents. The 50ml volume implies a compact form factor for benchtop use and storage. Connections for gas inlet, outlet or pressure monitoring are not detailed in the supplied data. Buyers requiring integrated stirring or specific port configurations should verify compatibility before purchase.
Highlights
- 50 ml capacity fits small-scale experiments
- PTFE liner resists acid and alkali corrosion
- Withstands 300 °C (572 °F) for high-temperature reactions
- Rated to 22 MPa (220 bar) for safe high-pressure operation
- Suitable for flammable, toxic or highly penetrative media
Specifications
| Type | Pressure Reactor |
|---|---|
| Capacity | 50ml |
Questions about this item
How do I install the PTFE liner into the 50ml stainless steel reactor and what step is often missed?
Place the PTFE liner inside the stainless steel body, seat the gasket, then tighten the lid bolts in a cross pattern to 22 MPa rated torque; the step often missed is re-torquing after the first heat cycle to 300°C.
What maintenance or replacement will the 50ml reactor need after repeated high-pressure runs?
Inspect the PTFE liner for cracks or permeation after each run at 220 Bar; replace the liner and gasket once deformation or chemical attack appears, and verify the pressure vessel hydrostatically before reuse.
Which limit appears first during sustained operation at maximum temperature and pressure?
The 22 MPa pressure ceiling is reached before the 300°C thermal limit in most exothermic reactions, so the relief device or burst disc will activate first if the reaction runs away.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
