HNZXIB
HNZXIB 400ml Hydrothermal Synthesis Reactor 240°C PTFE lining Non-magnetic Stainless Steel Autoclave KH series
A 400 ml hydrothermal synthesis reactor with a PTFE lining and non-magnetic stainless steel body, rated for 240 °C maximum temperature and 80 % fill capacity
- TypePressure Reactor
- Temperature RangeRT~240°C
- MaterialSteel
- Capacity400ml
- 400 ml capacity handles large sample batches
- PTFE lining resists acids and alkalis during digestion
- Non-magnetic 0Cr18Ni9Ti steel avoids magnetic interference
- Operates up to 240 °C with 220 °C safety limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
400ml Hydrothermal Reactor for Laboratory Research
The HNZXIB KH series autoclave provides a 400ml capacity vessel for hydrothermal synthesis up to 240°C. It is built for university teaching, research units and scientific experiments requiring high-pressure digestion of insoluble materials. The PTFE inner lining offers acid and alkali resistance for handling heavy metals, pesticide residues and organic samples. A non-magnetic stainless steel body ensures structural integrity under pressure.
Non-magnetic Stainless Steel with PTFE Lining
The reactor uses 0Cr18Ni9Ti stainless steel for the outer shell and a Teflon liner for double protection against corrosive media. Heating and cooling rates are limited to below 5°C per minute to maintain safety. Filling volume must not exceed 80% of the 400ml capacity. The vessel ships in a wooden case and carries a one-year manufacturer warranty.
Replaces Smaller Digestion Vessels for Scale-Up Work
This 400ml unit upgrades from lower-capacity autoclaves when larger sample batches are needed for materials, energy or environmental research. The jump is worth it when experimental protocols demand volumes that smaller reactors cannot accommodate. It is not suited for processes requiring temperatures above 240°C or faster thermal cycling than 5°C per minute.
Highlights
- 400 ml capacity handles large sample batches
- PTFE lining resists acids and alkalis during digestion
- Non-magnetic 0Cr18Ni9Ti steel avoids magnetic interference
- Operates up to 240 °C with 220 °C safety limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
Specifications
| Type | Pressure Reactor |
|---|---|
| Temperature Range | RT~240°C |
| Material | Steel |
| Capacity | 400ml |
Questions about this item
What is the maximum operating temperature and safety temperature for the 400ml KH-series reactor?
The reactor operates up to 240°C with a safety temperature limit of 220°C.
What are the material requirements for the reactor body and inner lining?
The body uses non-magnetic 0Cr18Ni9Ti stainless steel with a PTFE inner lining for acid and alkali resistance.
What is the correct filling limit and cooling procedure before opening?
Fill no more than 80% capacity and allow natural cooling to room temperature before opening the lid.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
