HNZXIB
HNZXIB 2XZ-2 Rotary Vane Vacuum Pump 110V 2 L/s 1400 rpm 0.37 kW 0.65 L oil 25 mm inlet
A rotary vane vacuum pump delivering 2 L/s at 1400 rpm with a 25 mm inlet and 0.65 L oil capacity
- TypeFreeze Dryer
- Color/FinishWhite
- 7-inch colour LCD touch screen for intuitive control
- Drying curve displayed in real time on LCD
- Transparent bell-type chamber allows visual monitoring
- Anti-return oil vacuum pump prevents sample contamination
- Integrally formed drying chamber ensures high strength and no leakage
Compact Freeze Dryer for Laboratory Use
This unit combines a 7-inch colour LCD touch screen with a transparent bell-type drying chamber so operators can monitor the drying curve in real time. The chamber is integrally formed without bonding for high strength and zero leakage. An anti-return-oil vacuum pump protects samples from contamination during the sublimation process.
Upgrade from Basic Manifold or Tray Dryers
The integrated LCD interface and built-in vacuum pump replace separate gauges, controllers and external pump connections that slower workflows require. The jump is worth it when a lab needs walk-away automation, visual process confirmation and a single 110 V 60 Hz power connection for the whole system.
Steady-State Operation Under Continuous Load
The rotary vane pump runs at 1400 rpm with a 0.37 kW motor and 0.65 L oil capacity to maintain a stable 2 L/s exhaust speed. Mixed environment-friendly refrigerant provides consistent cooling capacity during long cycles. The KF-25 inlet and integral chamber design keep vacuum tight without degradation over extended runs.
Highlights
- 7-inch colour LCD touch screen for intuitive control
- Drying curve displayed in real time on LCD
- Transparent bell-type chamber allows visual monitoring
- Anti-return oil vacuum pump prevents sample contamination
- Integrally formed drying chamber ensures high strength and no leakage
Specifications
| Type | Freeze Dryer |
|---|---|
| Brand | HNZXIB |
| Model | 10N-60D2 |
| Color/Finish | White |
Questions about this item
Will the 25 mm KF-25 inlet connect directly to my chamber flange?
The pump inlet is a 25 mm KF-25 flange; use a matching KF-25 clamp and centring ring to seal it to your chamber.
What is the correct sequence for wiring the 110 V motor and adding the 0.65 L of oil?
Fill the pump with 0.65 L of vacuum-pump oil before the first start, then connect to a 110 V 60 Hz supply; running the motor dry will damage the vanes.
How often should the 0.65 L oil charge be changed on this 2 L/s rotary vane pump?
Change the oil when it turns dark or milky, typically after every few hundred operating hours; drain the old 0.65 L completely and refill with fresh vacuum-pump oil.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
