HNZXIB
HNZXIB 2L High Pressure Reactor with Pressure Gauge and Needle Valve
2-litre stainless-steel pressure reactor rated to 22 MPa and 300 °C with built-in gauge and needle valve
- TypePressure Reactor
- Capacity2L
- Handles 22 MPa working pressure with static-seal design
- Reaches 300 °C operating temperature for demanding reactions
- 2000 ml capacity suits pilot-scale batch processing
- Stainless-steel construction resists corrosion and high temperatures
- Needle valve and pressure gauge enable precise control
2L High Pressure Reactor
The HNZXIB 2L High Pressure Reactor is a 2000ml laboratory vessel designed for chemical reactions requiring elevated temperature and pressure. Constructed from stainless steel, it features a static-seal design with a flat cover secured by main bolts and nuts for a no-leakage closure. A pressure gauge and needle valve are integrated for monitoring and control during operation.
Build integration and requirements
The reactor body connects to the flange via threading and relies on external heating systems capable of precise temperature management. A gasket or tapered line-contact seal achieves containment when main nuts are tightened symmetrically and gradually to prevent cover tilt. The vessel supports a maximum operating pressure of 22Mpa (220Bar) and a temperature limit of 300°C (572°F), with external heating not exceeding 350°C.
Bundled accessories and software impact
The included pressure gauge provides direct visual feedback of internal pressure up to the rated safety limit. The needle valve enables controlled gas or liquid release and sampling without compromising the sealed environment. No software or electronic control hardware is supplied; a separate PID temperature control system is required to manage heating and cooling rates within the specified limits.
Highlights
- Handles 22 MPa working pressure with static-seal design
- Reaches 300 °C operating temperature for demanding reactions
- 2000 ml capacity suits pilot-scale batch processing
- Stainless-steel construction resists corrosion and high temperatures
- Needle valve and pressure gauge enable precise control
Specifications
| Type | Pressure Reactor |
|---|---|
| Capacity | 2L |
Questions about this item
What is the maximum continuous pressure the 22 MPa rated vessel can hold?
The reactor is rated for 22 MPa (220 Bar) safety pressure during operation.
How hot does the stainless steel body get at the 300 °C operating limit?
External heating should not exceed 350 °C; the vessel reaches 300 °C (572 °F) under PID control.
Which fittings must I supply to connect gas lines to the needle valve?
The vessel uses a flange-and-bolt seal with gasket; compatible tubing and fittings for the needle valve are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
