Hi Temp
Hi Temp R51-24X48X1-P welding pad, 24" W, 4 ft H, 32 oz/sq yd
Fibreglass welding pad with silicone coating withstands 750 °F, measures 24 by 48 inches, weighs 32 oz/sq yd and meets CSA and UL 1709 standards
- TypeWelding Protection
- Withstands 1750 °F heat for safe welding
- 32 oz/sq yd fiberglass resists chemicals and water
- CSA and UL 1709 certified protection
- 24 in by 48 in covers large work areas
- 82 mm thick heavy-duty silicone-coated material
Heavy-Duty Welding Pad
The Hi Temp R51-24X48X1-P is a fiberglass welding blanket coated with silicone for heavy-duty protection. It withstands temperatures up to 1,750 degrees Fahrenheit and resists chemicals and water. The pad measures 24 inches wide by 4 feet long with a thickness of 0.82 mm. It meets CSA and UL 1709 standards for safety compliance.
Flexible Drop-In Protection
The blanket lays flat over workbenches, floors or vertical surfaces without grommets or fasteners to install. Its 32 oz/sq yd weight keeps it in place during grinding or welding while remaining pliable enough to wrap irregular shapes. The red coating increases visibility in busy shops and the silicone layer sheds spatter without stiffening over time.
High Heat Containment
The fiberglass core blocks radiant heat and molten splatter at 1,750 degrees Fahrenheit during continuous use. The silicone coating does not off-gas or produce smoke under normal welding temperatures. The 0.82 mm thickness adds minimal thermal mass so the pad cools quickly between passes and stores compactly when rolled.
Highlights
- Withstands 1750 °F heat for safe welding
- 32 oz/sq yd fiberglass resists chemicals and water
- CSA and UL 1709 certified protection
- 24 in by 48 in covers large work areas
- 82 mm thick heavy-duty silicone-coated material
Specifications
| Type | Welding Protection |
|---|---|
| Brand | HI TEMP |
Questions about this item
At what temperature does the silicone-coated fiberglass start to degrade?
The pad is rated for a maximum temperature of 1,750 degrees F before the material begins to break down.
Will the pad get hot enough to burn the work surface during a full shift?
The 0.82 mm thick fiberglass with silicone coating insulates the surface, keeping heat transfer low during extended use.
Does the pad come with grommets or fasteners to hang it in place?
No grommet holes or fasteners are included; the pad lays flat or must be clamped by the user.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
