Hi Temp
Hi Temp R51 24x24 Welding Pad 32 oz/sq yd .82 mm 750°F CSA UL 1709
Fiberglass welding pad rated to 750 °F with silicone coating and CSA UL 1709 certification
- TypeWelding Protection
- Heavy-duty protection rated to 750 °F
- Silicone-coated fiberglass resists chemicals and water
- CSA certified and meets UL 1709 standard
- 32 oz/sq yd weight with 0.82 mm thickness
- 24 × 24 inch pad, no grommets or fasteners needed
Welding Pad for Heavy-Duty Protection
The Hi Temp R51 welding pad measures 24 inches by 24 inches and is built for heavy-duty welding environments. Its fiberglass core with silicone coating withstands temperatures up to 750 degrees Fahrenheit. The pad meets CSA and UL 1709 safety standards for reliable protection during hot work.
Fiberglass Construction With Silicone Coating
The 0.82 mm thick material weighs 32 oz per square yard and resists chemicals and water for durability on the job site. Red coloring provides high visibility in the workspace. No grommets or fasteners are included, so the pad lays flat or can be clamped as needed for flexible positioning.
Rated for 750°F Maximum Temperature
The UL 1709 certification confirms performance under defined fire-exposure conditions. Protection is limited to the stated temperature ceiling and the pad's 2-foot square coverage area. Buyers needing larger continuous shielding or higher temperature ratings will need additional or different protective materials.
Highlights
- Heavy-duty protection rated to 750 °F
- Silicone-coated fiberglass resists chemicals and water
- CSA certified and meets UL 1709 standard
- 32 oz/sq yd weight with 0.82 mm thickness
- 24 × 24 inch pad, no grommets or fasteners needed
Specifications
| Brand | HI TEMP |
|---|---|
| Type | Welding Protection |
Questions about this item
What temperature does the CSA-certified UL 1709 pad withstand?
The pad is rated for continuous exposure up to 750°F and carries both CSA certification and UL 1709 listing for fire protection.
Will the 24-by-24-inch fiberglass sheet fit my workbench without grommets or fasteners?
The pad measures 24 inches square, 0.82 mm thick, and has no grommet holes or included fasteners, so it lays flat or can be clamped as needed.
How do I install the 32 oz/sq yd welding blanket correctly?
Unroll the red silicone-coated fiberglass sheet, position it with the coated side facing the heat source, and secure the edges with clamps or weights rather than relying on adhesives.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
