Hi Temp
Hi Temp O51-10X12-20-B Welding Curtain 10 ft x 12 ft 20 oz
Opaque silicone-coated fiberglass curtain measuring 10 ft by 12 ft withstands 1,200 °F and resists chemicals and water
- TypeWelding Protection
- Opaque silicone-coated fiberglass blocks intense welding arcs
- Withstands 1,200 °F for high-heat protection
- 20 oz/sq yd material resists chemicals and water
- FM Approved for verified safety compliance
- 10 ft × 12 ft size with corner grommets for easy hanging
Hi Temp O51 Welding Curtain 10x12 ft
The Hi Temp O51 welding curtain measures 10 ft high by 12 ft wide and uses 20 oz silicone-coated fiberglass. The opaque orange material withstands 1,200 Degrees F and resists chemicals and water. Grommets in the four corners and a hemmed 10 ft edge simplify mounting.
Upgrade from lighter curtains for high-heat jobs
Replace thinner vinyl or lighter fiberglass screens when spatter, slag or radiant heat exceed their limits. The 20 oz weight and FM-approved rating make the step up worthwhile for heavy-duty MIG, TIG or stick operations that demand continuous 1,200 Degrees F protection.
Check mounting points and clearance before ordering
Verify the structure can support the 20 oz per square yard fabric and that 10 ft of vertical drop fits the bay. Confirm grommet spacing matches existing hooks or cable, and ensure local codes accept FM approval for the intended welding processes.
Highlights
- Opaque silicone-coated fiberglass blocks intense welding arcs
- Withstands 1,200 °F for high-heat protection
- 20 oz/sq yd material resists chemicals and water
- FM Approved for verified safety compliance
- 10 ft × 12 ft size with corner grommets for easy hanging
Specifications
| Type | Welding Protection |
|---|---|
| Brand | HI TEMP |
Questions about this item
What size grommets does the curtain use for mounting?
The curtain has grommets at each of the four corners for hanging or tying down.
How should the hemmed 10 ft edge be oriented during installation?
The hem runs along the 10 ft side; hang that edge at the top or bottom to prevent fraying.
Will the silicone coating need reapplication over time?
The 0.54 mm thick silicone coating is bonded to the fiberglass and does not require reapplication.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
