Hi-Run
Hi-Run CT1009 Sawtooth 25 PSI 4.1" x 3.5-4" 4-Ply Tire and Wheel
Sawtooth tread 4-ply rubber tire and wheel assembly rated to 25 PSI for wheelbarrow use
- TypeTires
- Size4.10/3.50-4
- Sawtooth tread grips loose ground
- 4-ply rubber resists punctures
- 25 PSI rating supports heavy loads
- 1" x 3.5-4" fits standard wheelbarrows
Hi-Run Sawtooth 4.10/3.50-4 Tire Assembly
The Hi-Run Sawtooth is a 4-ply tire and wheel assembly built for wheelbarrows and similar yard equipment. It uses a 4.10/3.50-4 size with a rubber tyre mounted on a four-inch rim. The unit arrives new and ready to fit onto compatible garden carts or barrows.
Inflation and Use Constraints
Users should follow the manufacturer's recommended pressure for safe operation. The rubber construction handles typical garden loads but is not designed for highway speeds or heavy-duty utility trailers.
Highlights
- Sawtooth tread grips loose ground
- 4-ply rubber resists punctures
- 25 PSI rating supports heavy loads
- 1" x 3.5-4" fits standard wheelbarrows
Specifications
| Brand | HI-RUN |
|---|---|
| Type | Tires |
| Size | 4.10/3.50-4 |
Questions about this item
How do I install the 4.1" x 3.5-4" tire and wheel assembly on my wheelbarrow, and what step is often missed?
Slide the wheel onto the axle, secure the retaining clip or cotter pin fully, then inflate to 24 PSI; many forget the pin and the wheel comes off under load.
What maintenance will the 4-ply rubber tire need later?
Check pressure monthly and refill to 24 PSI; inspect tread for cracks or embedded debris, and replace the tire if the rubber perishes or the ply separates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
