We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black coil rear shock 265mm eye-to-eye 85mm travel 450lb spring 1265g

HI_BIKE

HI_BIKE BURNER-RCP2S Rear Shock 265mm 450lb 1265g

SKU CH-6M0D-VQH5W

A 265 mm eye-to-eye rear shock with 85 mm travel, 450 lb spring rate and four-system damping for AM, FR and DH riding

  • TypeForks & Shocks
  • 265 mm eye-to-eye length suits long-travel frames
  • 450 lb spring rate matches aggressive downhill loads
  • Four-system damping with rebound, compression, preload and high-pressure adjust
  • 28 mm hard-anodised AL-7075 body resists wear
  • 1265 g weight keeps the rear end light

Shock Specifications

The HI_BIKE BURNER-RCP2S is a coil-sprung rear shock built for all-mountain, freeride and downhill riding. It suits riders who need a 450 lb spring rate and 85 mm of travel in a 265 mm eye-to-eye length.

Damping Constraints

The four-system damper provides separate rebound, compression, preload and high-pressure big-impact adjustments. A 12 mm hard-chromed shaft runs inside a 28 mm body, so the available tuning range is defined by these fixed dimensions.

Build and Fit

The dark hard-anodised AL-7075 body weighs 1265 g and uses bushings with a 7.63 mm inner hole. The 265 mm mounting length and 28 mm diameter determine frame compatibility without adapters.

Highlights

  • 265 mm eye-to-eye length suits long-travel frames
  • 450 lb spring rate matches aggressive downhill loads
  • Four-system damping with rebound, compression, preload and high-pressure adjust
  • 28 mm hard-anodised AL-7075 body resists wear
  • 1265 g weight keeps the rear end light

Specifications

TypeForks & Shocks

Questions about this item

Which spring rate should I pick for the BURNER-RCP2S?

This unit is supplied with a 450lb coil spring; choose it if your rider weight and frame leverage ratio call for that rate.

What does the 85mm travel figure mean on the trail?

The shock compresses 85mm from full extension to bottom-out, giving that amount of rear-wheel movement through the linkage.

What mounting standard does the 7.63mm bushing inner hole suit?

It fits frames and linkage hardware that use a 7.63mm (0.30in) bolt or pin diameter for the eyelet.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.