We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass quarter-turn valve with anti-seize stem and compression ends

Heritage

Heritage CD43308BX 1/2" IPS x 3/8" O.D. Anti-Seize Deluxe Quarter Turn

SKU CH-4CCA-45HRP

Quarter-turn valve with anti-seize mechanism connects 1/2" IPS to 3/8" O.D. for reliable shut-off

  • Quarter-turn handle enables fast shut-off
  • 1/2" IPS inlet fits standard supply lines
  • 3/8" O.D. outlet connects common fixtures
  • Anti-seize coating resists corrosion buildup
  • California Prop 65 warning applies to contents

Quarter-turn valve for 1/2" IPS and 3/8" O.D.

The Heritage CD43308BX is a quarter-turn valve built for 1/2 inch IPS by 3/8 inch O.D. connections. It features an anti-seize design intended to keep the mechanism free-moving over time. The brass construction suits residential and light-commercial plumbing installations where a compact shut-off is required.

Anti-seize mechanism reduces operating torque

The anti-seize feature lowers the force needed to turn the handle after periods of inactivity. This helps prevent seizing in hard-water environments and extends the service interval. The quarter-turn action provides a clear on/off position without the multiple rotations of a traditional gate valve.

Replaces multi-turn stop valves on supply lines

This valve replaces older multi-turn stops on fixture supply lines where quicker shut-off is preferred. The jump is worthwhile when the existing valve is stiff, corroded or leaks at the packing nut. It is not suited for applications that require a full-port ball valve or a drain port for winterising.

Highlights

  • Quarter-turn handle enables fast shut-off
  • 1/2" IPS inlet fits standard supply lines
  • 3/8" O.D. outlet connects common fixtures
  • Anti-seize coating resists corrosion buildup
  • California Prop 65 warning applies to contents

Specifications

BrandHERITAGE

Questions about this item

How is the 1/2" IPS inlet connected and what step is often missed?

Thread the 1/2" IPS inlet onto the supply pipe using pipe-thread sealant or tape; the step often missed is fully tightening the quarter-turn stem after the body is secured.

What maintenance or replacement will the anti-seize stem need later?

The anti-seize coating on the stem reduces binding; if the valve drips or becomes stiff, replace the internal stem assembly rather than the whole valve.

What limit appears first under sustained use of the quarter-turn mechanism?

Repeated quarter-turn cycles can wear the stem seal first, causing a slow drip at the handle before the body or 3/8" O.D. outlet shows any issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.