Helicoil
Helicoil 2087-10 Straight Flute Hand Tap M10-1.50 Plug Uncoated 4
M10×1.5 thread tap cuts internal metric coarse threads in 86 mm overall length
- TypeHole, Drill, Bore & Wire Gauges
- Cuts precise M10x1.50 threads with 4 straight flutes
- 86 mm overall length gives full reach for deep holes
- 42 mm thread length ensures complete engagement
- Plug chamfer starts easily in through or blind holes
- High-speed steel construction resists wear on tough materials
Thread repair tap for M10×1.5 coarse threads
This Helicoil 2087-10 straight-flute hand tap prepares holes for screw-thread inserts in metric coarse M10×1.5 size. It is made from high-speed steel with a bright uncoated finish and a right-hand thread direction. The plug chamfer and four flutes suit through-hole and blind-hole work in general workshop and automotive maintenance.
Fits standard tap wrenches
The tap has an overall length of 86.00 mm and a thread length of 42.00 mm with a D10 thread limit. It needs a correctly sized tap drill before use and a tap wrench or T-handle for manual operation. The uncoated surface works with common cutting fluids and frees the user from coating-specific lubrication constraints.
Steady cutting in sustained hand-tapping sessions
High-speed steel construction maintains edge life during repeated thread cutting in steel, aluminium and cast iron. The four-flute design distributes chip load evenly, reducing torque spikes when the tap advances through the full 42.00 mm thread depth. The plug chamfer eases entry on each new hole, keeping performance consistent across multiple repairs.
Highlights
- Cuts precise M10x1.50 threads with 4 straight flutes
- 86 mm overall length gives full reach for deep holes
- 42 mm thread length ensures complete engagement
- Plug chamfer starts easily in through or blind holes
- High-speed steel construction resists wear on tough materials
Specifications
| Brand | Helicoil |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
How does the 42.00 mm thread length affect tap life when cutting full-depth M10x1.5 holes?
The 42.00 mm thread length on this M10x1.50 plug tap matches standard through-hole depth, so the four straight flutes evacuate chips without binding, preserving the HSS cutting edges.
Does the uncoated high-speed steel generate noticeable heat during repetitive M10x1.5 tapping?
Bright uncoated HSS runs warmer than coated taps; using cutting fluid keeps the 86.00 mm tool cool enough for all-day production threading.
What tap wrench or holder fits the shank of this 2087-10 plug tap?
The M10x1.50 STI tap uses a standard metric shank that fits any adjustable tap wrench or T-handle sized for M10 tooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
