We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Heil Sound FIN dynamic microphone, chrome finish, blue LEDs, XLR connection

Heil Sound

Heil Sound FIN Microphone Blue LEDs Phantom Power

SKU CH-MN00-DKKN8

A dynamic microphone with blue LEDs powered by phantom power for live sound, recording and broadcast

  • Natural mid-range presence from 4 kHz response peak
  • Blue LEDs illuminate only with 48 V phantom power
  • Cardioid pattern rejects off-axis sound
  • Low-mass 1-1/18" voice coil captures detail
  • Standard 5/8" 27-thread mount fits booms and stands

Built for live sound and broadcast

The Heil Sound Fin dynamic microphone captures natural, clear audio for live sound, recording and broadcast work. A special magnet structure with a large low-mass aluminium voice coil delivers a traditional mid-range presence lift at 4 kHz. The tight linear cardioid pattern rejects off-axis noise. A Sorbothane shockmount and internal foam windscreen reduce handling sound and plosives.

Not for setups without phantom power

The four internal blue LEDs illuminate only when the microphone receives +48 volt DC phantom power from a professional mixing console XLR input. Buyers who cannot supply phantom power will not see the LED effect. Users needing a wider frequency range beyond 60 Hz to 18 kHz should consider other models.

Standard 5/8 inch 27-thread mount

The microphone fits any boom or floor stand with a standard 5/8 inch 27-thread connection. This single mechanical specification decides whether the Fin integrates directly into existing stand hardware. No adapter is required when the stand matches this thread.

Highlights

  • Natural mid-range presence from 4 kHz response peak
  • Blue LEDs illuminate only with 48 V phantom power
  • Cardioid pattern rejects off-axis sound
  • Low-mass 1-1/18" voice coil captures detail
  • Standard 5/8" 27-thread mount fits booms and stands

Specifications

No published specifications for this item yet.

Questions about this item

Does this microphone require a mixer or interface that provides +48 V phantom power?

Yes, the four internal blue LEDs only illuminate when the Fin is connected to a 3-pin balanced XLR input supplying +48 V DC phantom voltage.

Can I mount the Fin on my existing 5/8"-27 thread boom arm or floor stand?

The Fin uses a standard 5/8" 27-thread connection, so it fits any boom or stand with that thread.

How will I know the Fin is receiving phantom power and operating correctly?

The four blue LEDs inside the grille light up only when +48 V phantom power is present, confirming the mic is powered and ready.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.