We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HEATIT ET-21 Freeze Protection Thermostat Outlet 38°F On 50°F Off 120V 1800W

SKU CH-Z4HZ-KHTTY MPN ET-21

Automatically powers connected heaters at 38 °F and shuts off at 50 °F, rated for 1800 W at 120 V with CSA approval for dry locations

  • TypeNO
  • Size/Dimensions3.9 cm x 10 cm x 16.4 cm
  • ColorET-21
  • Voltage12
  • Mount TypeNO
  • Operating Temperature Range38 degrees_fahrenheit
  • Automatically energises below 38°F and cuts power at 50°F
  • CSA certified for safe operation in dry locations
  • Handles up to 1800 W at 15 A for heaters and cables
  • Simple plug-in installation with no wiring required
  • Smart indicator light shows when outlet is energised

Plug-in freeze protection outlet

The HEATIT ET-21 is a plug-in thermostat outlet designed to protect pipes, engines and other equipment from freezing. It suits homeowners, contractors and vehicle owners who need automatic cold-weather power control without wiring.

1800 W heating capacity with fixed set-points

The outlet energises connected loads when the ambient temperature falls to 38 °F (3 °C) and cuts power again at approximately 50 °F (10 °C). It handles resistive heating loads up to 1800 W at 120 VAC, drawing a maximum of 15 A, so it runs most portable heaters and heat-tapes within that limit.

120 VAC CSA-approved for dry locations only

The device is certified by CSA for 120 VAC use in dry indoor or sheltered outdoor locations. It provides no cooling function, no adjustable temperature range and no digital programming. It cannot switch refrigeration loads above 720 W and must not be used in wet or damp environments.

Highlights

  • Automatically energises below 38°F and cuts power at 50°F
  • CSA certified for safe operation in dry locations
  • Handles up to 1800 W at 15 A for heaters and cables
  • Simple plug-in installation with no wiring required
  • Smart indicator light shows when outlet is energised

Specifications

TypeNO
BrandHEATIT
ModelET-21
Size/Dimensions3.9 cm x 10 cm x 16.4 cm
ColorET-21
Voltage12
Mount TypeNO
Operating Temperature Range38 degrees_fahrenheit
Item Count12 pack
Selling Unit1
FeaturesNO, 1800 watts
Part Number43551-106081

Questions about this item

Will the HEATIT ET-21 work with my existing 120 V engine block heater rated at 1800 watts?

The ET-21 supports up to 1800 watts at 120 V, so a 1800 watt engine block heater is within the rated maximum output for heating.

How can I verify the HEATIT ET-21 is operating correctly after plugging it in?

Place the unit in a freezer for 45 minutes, then plug it in; the red indicator light should illuminate when the ambient temperature drops below 38 °F and the outlet is energised.

What comes in the box with the HEATIT ET-21 and what must I provide separately?

The package contains one ET-21 thermostat outlet; you must supply a standard 120 V electrical outlet and the heating device you wish to control.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.