Haywards
Haywards Sunon EF92251S1-Q100-S99 9225 12V 3.83W 90×25 mm CPU cooler fan video accessory
12 V 90×25 mm CPU cooler fan with 4-pin PWM control and two ball bearings
- TypeOther
- Two-ball bearing for longer fan life
- 12 V DC operation with 3.83 W draw
- 90 × 25 mm frame fits standard 92 mm mounts
- 4-pin PWM interface enables speed control
- CE certified for European compliance
What this fan is for
This 90 mm × 25 mm DC fan runs at 12 V and draws 3.83 W. It is built for CPU heat-sink cooling inside a computer case and suits builders who need a direct replacement for the Sunon EF92251S1-Q100-S99 model.
The spec that decides fit
The four-pin PWM power interface and 90 mm square frame with 25 mm thickness determine whether the fan mounts on your existing cooler. Verify those dimensions and the 4-pin connector before ordering.
Thermals noise and power
At 12 V the fan spins up to 18 000 RPM and moves 19.4 CFM, producing 54 dB of radiator noise. Operating voltage range is 7.0–13.4 V and the two-ball bearing is rated for 70 000 hours of life.
Highlights
- Two-ball bearing for longer fan life
- 12 V DC operation with 3.83 W draw
- 90 × 25 mm frame fits standard 92 mm mounts
- 4-pin PWM interface enables speed control
- CE certified for European compliance
Specifications
| Type | Other |
|---|
Questions about this item
How much power does the 12 V fan draw in a real system?
It is rated at 3.83 W at 12 V, so a typical motherboard header will see roughly that load.
What does the 4-pin PWM interface actually control?
The 4-wire PWM connection lets the motherboard vary speed between 7.0 V and 13.4 V, with a tachometer signal for monitoring.
Will the 90 × 25 mm frame fit my CPU cooler mounting holes?
The fan measures 90 mm square by 25 mm thick with standard corner holes for 92 mm fan mounts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



