Haywards
Haywards DBTB0428B2G 40mm 12V 4-pin fan
A 40 mm 12 V 4-pin cooling fan with double ball bearings, PWM speed control and up to 18000 RPM airflow of 19.4 CFM at 54 dB
- TypeOther
- 40 mm compact size fits tight chassis spaces
- Double ball bearing rated for 70 000 hours of operation
- PWM intelligent temperature control adjusts speed automatically
- 4 CFM airflow at up to 18 000 RPM
- 54 dB noise level disclosed for informed choice
Compact 40 mm cooling fan
The Haywards DBTB0428B2G is a 40×40×28 mm axial fan designed for computer cases and other electronics enclosures. It runs on 12 V DC with a 4-wire PWM interface for intelligent speed control and speed reporting. Double ball bearings support a rated life of 70000 hours.
18000 RPM maximum speed
The fan spins up to 18000 RPM ±10 % and delivers 19.4 CFM of airflow. Operating voltage ranges from 7.0 V to 13.4 V with a current draw of 1 A at 12 V. Acoustic output reaches 54 dB at full speed.
High airflow in tight spaces
Suitable for small-form-factor builds and component spot-cooling where a 40 mm frame is required. The high rotational speed provides strong static pressure but produces noticeable noise at peak RPM. Not suited for silent or noise-sensitive environments.
Highlights
- 40 mm compact size fits tight chassis spaces
- Double ball bearing rated for 70 000 hours of operation
- PWM intelligent temperature control adjusts speed automatically
- 4 CFM airflow at up to 18 000 RPM
- 54 dB noise level disclosed for informed choice
Specifications
| Type | Other |
|---|
Questions about this item
What does the 18000 RPM figure mean when the fan is running inside a case?
At 18000 RPM the fan moves 19.4 CFM of air through a 40 mm frame, delivering strong airflow for tight spaces while producing 54 dB of noise.
How does the 4-wire PWM interface control the fan in practice?
The 4-pin connector carries a PWM signal that lets the motherboard vary speed between 7.0 V and 13.4 V, and the fourth wire reports actual RPM back to the system.
What clearance and mounting holes does the 40×40×28 mm frame need?
The fan requires a 40 mm square cut-out with standard 40 mm mounting centres and 28 mm depth clearance for the thicker housing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



