HAYWARD POOL PRODUCTS INC
HAYWARD POOL PRODUCTS INC SB1075ST132 Basket Strainer 3/4 in Socket/Threaded
A 3/4 in socket and threaded basket strainer with PVC housing and screen, 0.03 in mesh, hand-removable cover, rated to 150 psi at 100 deg F and 70 deg F maximum temperature
- Hand-removable cover speeds up cleaning and inspection
- PVC housing resists corrosion in pool chemical environments
- 03 in mesh captures fine debris before it reaches equipment
- Dual socket and threaded connections fit existing 3/4 in plumbing
- Rated to 150 psi for reliable operation under pressure
3/4 in PVC Basket Strainer
The Hayward Flow Control SB1075ST132 is a single basket strainer built for industrial plumbing lines. Its PVC housing and screen resist corrosion in water treatment and chemical feed applications. The unit accepts both socket and threaded connections on a 3/4 in pipe. Installers who need a compact filter for low-pressure circuits will find it suitable.
Thermal and Pressure Limits
The strainer is rated for a maximum pressure of 150 psi and 125 psi at 100 degrees F. Fluid temperature must not exceed 70 degrees F during normal operation. PVC construction means the body does not conduct heat and adds no thermal load to the system. No moving parts are present, so noise and power draw are not factors.
Hand-Removable Cover and Connections
A hand-removable cover allows quick screen access without tools for routine cleaning. The 0.03 in mesh traps debris while maintaining flow in irrigation or process piping. Dual socket and threaded ports let the installer choose the joint method that matches existing fittings. The 11 11/16 in overall height fits in tight vertical runs.
Highlights
- Hand-removable cover speeds up cleaning and inspection
- PVC housing resists corrosion in pool chemical environments
- 03 in mesh captures fine debris before it reaches equipment
- Dual socket and threaded connections fit existing 3/4 in plumbing
- Rated to 150 psi for reliable operation under pressure
Specifications
| Brand | HAYWARD |
|---|
Questions about this item
How do I install the SB1075ST132 basket strainer on a 3/4 inch pipe, and what step is often missed?
Cut the pipe, apply primer and PVC cement to the socket end or thread sealant to the threaded end, then join. The step often missed is allowing the cement to cure fully before pressurising the line to 150 psi.
What maintenance does the PVC screen with 0.03 inch mesh need over time?
Shut off flow, remove the hand-removable cover, lift out the basket, and rinse debris from the PVC screen. Inspect for cracks before reassembling; replace the screen if mesh is torn or deformed.
At what temperature does the strainer hit its pressure limit first during sustained use?
At 100 degrees F the maximum working pressure drops to 125 psi, lower than the 150 psi rating at cooler temperatures. Sustained operation above 70 degrees F requires staying at or below 125 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



