We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC bulkhead fitting with threaded and socket ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFAS1005CFS 1/2 in PVC Bulkhead Trap

SKU CH-WF8M-PG8DC MPN BFAS1005CFS

A 1/2 inch PVC bulkhead fitting with FPM gasket rated to 150 psi and a 40 to 140 degree F temperature range

  • TypeDrain Components
  • MaterialHAWA
  • ColorGray
  • Secure bulkhead seal with FPM gasket material
  • Withstands 150 psi maximum pressure rating
  • Operates from 40 to 140 degrees Fahrenheit
  • Fits walls up to 1.08 inches thick
  • Gray PVC body for corrosion resistance

Pool Bulkhead Fitting 1/2 in PVC

The Hayward BFAS1005CFS is a PVC bulkhead tank fitting designed for 1/2-inch pipe connections. It uses an FNPT by socket joint and requires a 1 3/8-inch hole for installation. The gray body suits standard pool and spa plumbing layouts.

Thermals and Pressure Rating

The fitting handles a maximum pressure of 150 psi and operates between 40 and 140 degrees Fahrenheit. The FPM gasket material resists common pool chemicals within this temperature range. Wall thickness up to 1.08 inches is supported for secure mounting.

Deciding Specification: 1/2 in Pipe Size

This component only fits 1/2-inch piping systems; it will not connect to larger or smaller diameters. Installers needing a different pipe size must select another model. The 1 3/8-inch hole requirement also dictates the tank or wall preparation.

Highlights

  • Secure bulkhead seal with FPM gasket material
  • Withstands 150 psi maximum pressure rating
  • Operates from 40 to 140 degrees Fahrenheit
  • Fits walls up to 1.08 inches thick
  • Gray PVC body for corrosion resistance

Specifications

TypeDrain Components
MaterialHAWA
ColorGray
BrandHayward
ModelBFAS1005CFS

Questions about this item

How do I install the 1/2 in FNPT x Socket bulkhead fitting through the tank wall?

Drill a 1 3/8 in hole, insert the body through the wall up to 1.08 in thick, tighten the locknut against the FPM gasket, then solvent-weld the socket end to the pipe.

Which part will need replacement first and how often should I check it?

The FPM gasket seals the joint; inspect it annually for cracking or compression set and replace it if leakage appears at the tank wall.

At what temperature does the PVC body reach its limit during continuous hot-water circulation?

The material is rated to 140 Degrees F; sustained operation above that temperature will soften the PVC and risk deformation or failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.