We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Light grey CPVC bulkhead trap with 3/4 inch FNPT threaded connections

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFA2007TFS 3/4 in FNPT x FNPT Bulkhead Trap

SKU CH-YWGV-TXJN0 MPN BFA2007TFS

A 3/4 in FNPT bulkhead trap in CPVC with FKM gasket, rated to 150 psi at 70 Degrees F and operable from 40 to 190 Degrees F

  • TypeDrain Components
  • CPVC construction resists corrosion for long service life
  • FKM gasket seals reliably across 40 to 190 °F range
  • 3/4 in FNPT threads connect directly without adapters
  • Rated 150 psi at 70 °F for high-pressure systems
  • Suits flat or curved tank walls for flexible installation

Bulkhead Tank Fitting CPVC

The Hayward BFA2007TFS is a CPVC bulkhead tank fitting designed for plumbing installations on curved or flat tank walls. It provides a sealed pass-through with female threaded ports on both sides. The fitting uses an FKM gasket for chemical resistance and requires no bolt holes for mounting.

3/4 inch FNPT threaded connections

Both the inside and outside connections are 3/4 inch female National Pipe Thread. This single specification determines whether the fitting matches the pipework and tank adapters already specified for the system. Verify thread size and gender before ordering.

Suits CPVC systems needing a flangeless bulkhead

Installers working with CPVC piping at pressures up to 150 psi and temperatures between 40 and 190 degrees F will find this fitting appropriate. It is not for applications requiring bolted flanges, larger pipe diameters, or service outside the stated pressure and temperature range.

Highlights

  • CPVC construction resists corrosion for long service life
  • FKM gasket seals reliably across 40 to 190 °F range
  • 3/4 in FNPT threads connect directly without adapters
  • Rated 150 psi at 70 °F for high-pressure systems
  • Suits flat or curved tank walls for flexible installation

Specifications

TypeDrain Components
BrandHayward
ModelBFA2007TFS

Questions about this item

What does the 150 psi rating at 70 Degrees F mean when the fitting is installed in a tank system?

It indicates the maximum pressure the bulkhead fitting can safely handle at that temperature, so the system pressure must stay at or below 150 psi when water is around 70 Degrees F.

How do the FNPT threads on both sides affect what pipe or hose I can connect?

Both the inside and outside connections use 3/4 in female NPT threads, so you will need male NPT fittings or adapters to join pipe or hose to either side.

What clearance or tank opening is required to mount this bulkhead fitting?

The fitting is designed for curved or flat tank walls and has zero bolt holes, so it installs by threading directly into a properly sized 3/4 in NPT opening in the tank wall.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.