We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark gray PVC bulkhead fitting with 3/4 inch FNPT threads on both sides

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFA1007TFS 3/4 in FNPT x FNPT Bulkhead Fitting

SKU CH-2SQT-449Y7 MPN BFA1007TFS

Connects 3/4 inch FNPT threads through tank walls with PVC construction and FKM gaskets rated to 150 psi at 70 degrees

  • TypeDrain Components
  • MaterialHAWA
  • ColorDark Gray
  • Secure FNPT x FNPT threads prevent leaks
  • 150 psi rating handles high-pressure systems
  • FKM gasket resists chemicals and heat
  • Operates from 40 to 140 degrees F
  • Dark gray PVC suits curved or flat tanks

Pool Bulkhead Fitting 3/4 in FNPT

This Hayward bulkhead fitting provides a 3/4 inch female NPT connection on both sides for tank installations. It is designed for curved or flat tank walls and uses a dark gray PVC body with an FKM gasket. The fitting suits pool and spa plumbing where a through-wall drain or port is required. It operates at pressures up to 150 psi at 70 degrees Fahrenheit.

For Standard Tank Penetrations

Installers needing a single 3/4 inch threaded pass-through for PVC pipe will find this fitting matches the specification. It is not suited for applications requiring bolt-hole flanges or larger connection sizes. Buyers who need multiple ports or a different thread standard should look at alternative fittings. The temperature range of 40 to 140 degrees Fahrenheit also limits use in high-heat systems.

Sustained Pressure Performance

Under continuous load the PVC body and FKM seal maintain integrity at the rated 150 psi at 70 degrees Fahrenheit. Performance at the upper temperature limit of 140 degrees Fahrenheit will follow the material derating curve for PVC. The absence of bolt holes means the seal relies entirely on gasket compression against the tank wall. Long-term reliability depends on proper installation torque and compatible tank thickness.

Highlights

  • Secure FNPT x FNPT threads prevent leaks
  • 150 psi rating handles high-pressure systems
  • FKM gasket resists chemicals and heat
  • Operates from 40 to 140 degrees F
  • Dark gray PVC suits curved or flat tanks

Specifications

TypeDrain Components
MaterialHAWA
ColorDark Gray
BrandHayward
ModelBFA1007TFS

Questions about this item

What size female NPT threads does the BFA1007TFS need on the tank and pipe side?

Both the inside and outside connections are 3/4 inch female NPT threads, so the tank opening and the mating pipe must each provide a matching 3/4 inch male NPT thread.

Will the FKM gasket on this fitting handle the same 150 psi at 70 degrees F rating as my existing PVC tank fittings?

Yes, the bulkhead fitting is rated for 150 psi at 70 degrees F, and the FKM gasket is specified for that pressure and temperature range.

How can I verify the BFA1007TFS is sealed correctly after installation?

Pressurise the system up to 150 psi at 70 degrees F and check the gasket face and both threaded joints for any water seepage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.