Hayward Flow Control
Hayward Flow Control TBH1100ASTV0000 Ball Valve 1 in PVC FPM Full Port
Manual two-way ball valve in PVC with FPM seals, full-port design and locking tee handle rated for 250 psi corrosive chemical or water service
- Full-port design enables unrestricted flow for corrosive chemicals and water
- PVC body with FPM seals resists aggressive media in industrial systems
- Three-piece true-union construction allows quick in-line maintenance without pipe removal
- Locking tee handle secures valve position against accidental operation
- Rated to 250 psi for reliable shut-off under high-pressure conditions
True Union Ball Valve 1 in PVC
This true-union ball valve uses a PVC body with FPM seals and a full-port PVC ball. The three-piece construction allows inline maintenance without removing the pipe run. A locking tee handle prevents accidental operation. Rated for 250 psi maximum operating pressure with corrosive chemicals and water.
Installers handling corrosive chemical lines
The valve suits systems that need full-bore flow and chemical resistance in a compact 1 in size. It is not intended for steam service, combustible gas lines or vacuum applications where a specific rating is required. Buyers needing 3-A sanitary compliance or a documented vacuum rating should select a different valve.
250 psi maximum operating pressure
This pressure limit determines whether the valve matches the system design pressure. The full-port ball and PVC/FPM materials support the rated pressure for water and corrosive chemicals. Verify that the piping system never exceeds 250 psi before specifying this valve.
Highlights
- Full-port design enables unrestricted flow for corrosive chemicals and water
- PVC body with FPM seals resists aggressive media in industrial systems
- Three-piece true-union construction allows quick in-line maintenance without pipe removal
- Locking tee handle secures valve position against accidental operation
- Rated to 250 psi for reliable shut-off under high-pressure conditions
Specifications
| Brand | HAYWARD FLOW CONTROL |
|---|
Questions about this item
What pipe size and material does the 1 in PVC valve body accept?
The valve body is 1 in nominal size, made of PVC, with straight three-piece construction and full-port PVC ball for corrosive chemicals and water service.
How is the true-union valve installed and what step is often missed?
The three-piece true-union design lets you thread or solvent-weld the end connectors to the pipe first, then bolt the centre section between them; the step often missed is tightening the union nuts after the body is seated.
When should the FPM seals be inspected or replaced?
Inspect the FPM (fluoroelastomer) seals whenever the system is depressurised for service; replace them if they show swelling, cracking or loss of elasticity after exposure to the rated 250 psi maximum operating pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
