We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White CPVC butterfly valve with black lever handle and lug connections

Hayward Flow Control

Hayward Flow Control 2" CPVC/EPDM Butterfly Valve Lever Handle

SKU CH-65E5-PKYT9

A 2-inch CPVC butterfly valve with EPDM liner, lever handle and 150 psi water-pressure rating for 32 to 190 °F service

  • 2-inch pipe size fits standard plumbing installations
  • CPVC body and disc resist corrosion in chemical service
  • EPDM liner handles 32 °F to 190 °F water temperatures
  • 150 psi pressure rating meets ANSI B16.10 and ISO 5752 standards
  • Lever handle provides quick quarter-turn shut-off control

2-inch CPVC Butterfly Valve for Plumbing Systems

This lug-style butterfly valve is built for industrial and commercial plumbing where CPVC construction and EPDM sealing are required. It fits a 2-inch pipe and uses a lever handle for manual flow control. The body and disc are both CPVC, rated to ANSI B16.10 and ISO 5752 face-to-face dimensions. Buyers who need a different body material or an actuated operator should look elsewhere.

Pressure and Temperature Performance Under Load

The valve handles a maximum water pressure of 150 psi across a temperature range of 32 to 190 degrees F. CPVC material meets ASTM D1784 Cell Class 23447 for consistent mechanical properties at elevated temperatures. EPDM liner resists degradation from hot water and common treatment chemicals. It is not suited for steam service or pressures above the stated limit.

Installation Profile and Standards Compliance

Four bolt holes on a 4 3/4-inch bolt circle with 3/4-inch lug diameter align with standard flange patterns. The design conforms to ISO 5211 for potential actuator mounting and carries NSF/ANSI 372 certification for lead-free compliance. Lever operation requires no external power and produces no operational noise. Systems needing automated control or higher pressure ratings will require a different valve.

Highlights

  • 2-inch pipe size fits standard plumbing installations
  • CPVC body and disc resist corrosion in chemical service
  • EPDM liner handles 32 °F to 190 °F water temperatures
  • 150 psi pressure rating meets ANSI B16.10 and ISO 5752 standards
  • Lever handle provides quick quarter-turn shut-off control

Specifications

BrandHAYWARD FLOW CONTROL

Questions about this item

Will the lever handle stay cool enough to touch during continuous 150 psi service at 190 Degrees F?

The CPVC body and EPDM liner handle the rated 190 Degrees F, but the lever itself is not thermally isolated; expect it to reach near-process temperature during sustained high-temperature flow.

Which flange bolt pattern must my existing piping match for the 4 lug holes?

The valve follows ANSI B 16.10 and ISO 5752 face-to-face dimensions with a 4 3/4 in bolt circle and 3/4 in lug holes, so your mating flanges need that same 4-hole pattern.

Can I keep my current ASTM D1784 Cell Class 23447 CPVC piping when installing this valve?

Yes — the valve body and disc are both CPVC Cell Class 23447, so solvent-cement joints to matching CPVC pipe are chemically compatible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.