We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Light gray CPVC bulkhead fitting with socket connections

Hayward

Hayward BFA2007SES Bulkhead Fitting 3/4 in Socket x Socket CPVC Light Gray

SKU CH-1WE7-ZJQE4

A CPVC bulkhead fitting with socket-to-socket connections for 3/4-inch pipe, rated to 150 psi and temperatures from 40 to 190 degrees F

  • CPVC body resists corrosion in harsh chemical environments
  • Socket-by-socket design simplifies tank wall installation
  • EPDM gasket seals reliably from 40 to 190 degrees F
  • Rated to 150 psi for dependable pressure containment
  • Fits walls up to 2.08 in thick with 1 5/8 in hole

Tank Fitting for 3/4 in CPVC Pipe

The Hayward BFA2007SES is a bulkhead fitting designed to pass a 3/4 inch CPVC pipe through a tank wall up to 2.08 inches thick. It uses a socket-by-socket connection for solvent welding on both sides and includes an EPDM gasket for a watertight seal. Installers working with industrial chemical storage or water treatment tanks will find the light gray CPVC body compatible with corrosive fluid service.

150 psi Pressure Rating at 190 Degrees F

The single specification that decides fit is the maximum working pressure of 150 psi across the full temperature range of 40 to 190 degrees Fahrenheit. Systems that operate above this pressure or temperature must select a different fitting class. The required mounting hole is 1 5/8 inches, so the tank wall must be drilled to that exact diameter before installation.

CPVC Body Resists Sustained Chemical Exposure

Under continuous load the CPVC material maintains structural integrity without the creep seen in standard PVC at elevated temperatures. The EPDM gasket resists degradation from prolonged contact with acids, bases and oxidising agents common in process piping. Threaded alternatives may loosen over time, but the socket weld creates a permanent, leak-free joint that does not require periodic retightening.

Highlights

  • CPVC body resists corrosion in harsh chemical environments
  • Socket-by-socket design simplifies tank wall installation
  • EPDM gasket seals reliably from 40 to 190 degrees F
  • Rated to 150 psi for dependable pressure containment
  • Fits walls up to 2.08 in thick with 1 5/8 in hole

Specifications

BrandHAYWARD

Questions about this item

What does the 150 psi rating mean when the fitting is installed in a tank?

The fitting is rated to hold up to 150 psi of internal pressure at its maximum operating temperature of 190 Degrees F.

How does the socket-by-socket connection work with 3/4 in CPVC pipe?

Both ends are solvent-weld sockets sized for 3/4 in CPVC pipe; the joint is made by cementing the pipe into each socket.

What hole size and wall thickness are needed to mount this bulkhead fitting?

Drill a 1 5/8 in hole through a tank wall up to 2.08 in thick; the fitting body length is 3 57/64 in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.