Haws
Haws 8904 Axion MSR Drench Hose Eye/Face Wash Deck Mount 8 ft Green
Deck-mounted drench hose with AXION MSR eye/face wash head, 8 ft rubber hose and 3.7 gpm flow
- TypeFacility & Worksite Safety
- ColorGreen
- Axion MSR head delivers targeted eye/face irrigation
- Chrome-plated brass squeeze valve stays open without holding
- 8 ft rubber hose reaches across the work area
- Noryl deck flange with key slot secures counter mounting
- 7 gpm flow rate meets emergency drench requirements
Haws 8904 Drench Hose for Facilities
The Haws 8904 Axion MSR drench hose provides a deck-mounted eye and face wash station for general-purpose work environments. It includes an AXION MSR wash head and a chrome-plated brass stay-open squeeze lever valve for hands-free operation. The unit mounts on a counter with a Noryl plastic deck flange featuring an integral key slot. A universal sign is included for clear identification.
Thermals, Noise and Power in Normal Use
This emergency drench hose operates without electrical power, so it produces no noise and draws no energy during standby or activation. Water flow is controlled by the inlet supply pressure and the stay-open valve mechanism. The rubber hose is rated for a burst strength of 250 psi to withstand pressure surges. Performance depends entirely on the facility water supply conditions.
Deciding Specification: 3.7 gpm Maximum Flow Rate
The maximum flow rate of 3.7 gpm determines whether this unit meets the required flushing capacity for your safety protocol. Verify that your water supply can deliver this volume at the 1/2 inch NPT inlet connection. The 8 ft rubber hose length defines the reach from the deck mount to the hazard area. Buyers needing a higher flow rate or a longer hose reach should select a different model.
Highlights
- Axion MSR head delivers targeted eye/face irrigation
- Chrome-plated brass squeeze valve stays open without holding
- 8 ft rubber hose reaches across the work area
- Noryl deck flange with key slot secures counter mounting
- 7 gpm flow rate meets emergency drench requirements
Specifications
| Brand | HAWS |
|---|---|
| Type | Facility & Worksite Safety |
| Color | Green |
Questions about this item
How is the 1/2-inch NPT inlet connected and what step is often missed?
Thread the 1/2-inch NPT inlet into the supply line, then secure the Noryl deck flange with its integral key slot so the unit cannot rotate during use.
Which wearable parts will need replacement after extended use?
The rubber hose, the chrome-plated brass squeeze lever valve, and the AXION MSR eye/face wash head are the components most likely to require replacement.
At what pressure does the hose reach its burst limit?
The hose is rated to a burst strength of 250 psi, so sustained supply pressure must stay well below that level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
