Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00995687BTC
In stock
Hawke Sport Optics
Hawke Sport Optics 30mm Match Riflescope Mount Rings 9-11mm High 22108
30 mm aluminium rings with double hex screws and a recoil stop pin for secure scope mounting
- Secure scope mounting with double hex screws
- Recoil stop pin fitted on 9-11mm high models
- Internal cushion tape prevents scope marking
- High-grade aluminium with matte black anodised finish
- Designed for 30mm tube riflescopes
30mm Match Riflescope Mount Rings
Hawke Sport Optics 30mm Match Riflescope Mount Rings 22108 are high-profile aluminium rings designed to secure a 30mm scope tube to a firearm rail. The pair uses double hex screws and an internal cushion tape to grip the optic firmly while preventing surface marks. A recoil stop pin is fitted to the 9-11mm base to resist rearward movement under fire.
Shooters needing a high ring height for 30mm tubes
These rings suit shooters who require a 9-11mm high mounting solution for a 30mm main tube and want the added security of a recoil stop pin. They are not for users with 1-inch or other tube diameters, nor for builds that demand a lower ring height or a single-screw clamp design.
9-11mm high ring height
The defining specification is the 9-11mm ring height, which determines the clearance between the rail and the scope body. This measurement decides whether the optic clears the barrel, action or iron sights on a specific rifle. Verify this height matches your required sight picture and clearance before purchase.
Highlights
- Secure scope mounting with double hex screws
- Recoil stop pin fitted on 9-11mm high models
- Internal cushion tape prevents scope marking
- High-grade aluminium with matte black anodised finish
- Designed for 30mm tube riflescopes
Specifications
| Brand | Hawke Optics |
|---|
Questions about this item
What tube diameter and ring height do the Hawke 22108 rings fit?
The 22108 rings accept a 30 mm scope tube and sit 9-11 mm high from the rail base.
How do I install the double hex screws and recoil stop pin correctly?
Tighten each hex screw evenly in a cross pattern, then seat the supplied recoil stop pin into the rail slot before final torque.
When should I replace the internal cushion tape on these rings?
Replace the cushion tape if it shows compression marks, tears, or the scope tube can shift under recoil.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
