We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PLA filament spool, 1.75 mm diameter, 1 kg weight

HATCHBOX 3D PLA-1KG1.75-WHT White PLA Filament 1.75mm 1000g

SKU CH-ABJ5-JFZKW

1.75 mm white PLA filament on a 1 kg spool with ±0.03 mm accuracy for low-warp printing at 180–210 °C

  • ColorWhite
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1000 grams
  • Precise prints with ±0.03 mm dimensional accuracy
  • Consistent extrusion at 180 °C–210 °C nozzle temperature
  • Low-odour PLA prints without a heated bed
  • Vacuum-sealed spool with desiccant resists moisture
  • 1 kg spool of 1.75 mm plant-based filament

HATCHBOX White PLA Filament 1.75mm

This 1 kg spool of white polylactic acid filament is made for hobbyists, educators and engineers who need reliable material for FDM 3D printing. The plant-based polymer prints without a heated bed and suits both first-time users and experienced makers producing prototypes, models or functional parts.

Thermal behaviour and printing characteristics

Recommended nozzle temperature ranges from 180°C to 210°C (356°F to 410°F). The formulation delivers minimal warping and low odour during extrusion. Dimensional accuracy is held to ±0.03 mm, which supports consistent flow and reduces the risk of clogging or bubbling across long prints.

Upgrade considerations and fit

The spool replaces lower-consistency filaments that exhibit diameter variation, moisture uptake or excessive warping. Vacuum sealing with desiccant preserves print quality during storage. The jump is worthwhile when dimensional tolerance and bed-adhesion reliability matter more than the lowest cost per kilogram.

Highlights

  • Precise prints with ±0.03 mm dimensional accuracy
  • Consistent extrusion at 180 °C–210 °C nozzle temperature
  • Low-odour PLA prints without a heated bed
  • Vacuum-sealed spool with desiccant resists moisture
  • 1 kg spool of 1.75 mm plant-based filament

Specifications

BrandHATCHBOX
Model3D PLA-1KG1.75-WHT
ColorWhite
MaterialPolylactic Acid
Diameter1.75
Weight1000 grams

Questions about this item

How do I load the 1.75 mm PLA filament and what step causes the most jams?

Heat the nozzle to 180 °C – 210 °C, insert the filament until resistance is felt, then push gently until extrusion starts; the step most people skip is pre-heating fully before feeding, which causes the filament to buckle in the Bowden tube.

What maintenance or replacement will this 1 kg spool need over time?

The filament itself is consumed during printing; store the unused portion in the vacuum-sealed bag with desiccant to prevent moisture absorption, and replace the spool when the 1000 g runs out.

What limit appears first during a long print with this PLA?

The dimensional accuracy of ±0.03 mm is the first tolerance that can affect layer adhesion and surface finish if the nozzle temperature drifts outside the 180 °C – 210 °C window during extended runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.