We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white condensate pump with barbed discharge fitting and open intake

Hartell Pumps

Hartell Pumps PABX-115 Condensate Pump 1/16 HP 115V 1.6A 128W

SKU CH-KD0S-KTGDS

Removes condensate at up to 2.3 gpm with 22 ft head and thermal protection

  • Removes condensate up to 22 ft head
  • Delivers 2.3 gpm at 1 ft of head
  • Provides 1.8 gpm at 10 ft of head
  • Supplies 0.9 gpm at 15 ft of head
  • Includes motor thermal protection for safe operation

Hartell PABX-115 Condensate Pump

This Hartell PABX-115 condensate pump removes water from HVAC equipment. It operates on 115V AC power and draws 1.6 amps. The unit includes motor thermal protection for safe operation.

Suits standard HVAC condensate removal

Installers handling typical residential or light commercial condensate drainage will find the 22 ft maximum head and flow rates up to 2.3 gpm at 1 ft of head suitable. It is not for plenum-rated installations or media temperatures above 110 Degrees F.

1/16 hp motor with 22 ft maximum head

The 1/16 horsepower motor delivers a maximum discharge head of 22 ft. Flow rate drops to 1.13 gpm at 20 ft of head and 0.9 gpm at 15 ft of head, determining if the pump meets the required lift.

Highlights

  • Removes condensate up to 22 ft head
  • Delivers 2.3 gpm at 1 ft of head
  • Provides 1.8 gpm at 10 ft of head
  • Supplies 0.9 gpm at 15 ft of head
  • Includes motor thermal protection for safe operation

Specifications

BrandHARTELL

Questions about this item

How do I wire the 115V AC motor and where do I attach the barbed discharge fitting?

Connect the pump to a 115V AC supply rated for 1.6A; push the discharge hose onto the barbed outlet and secure it with a clamp.

Which parts will need replacement after extended running?

The motor includes thermal protection, so the impeller seal and check valve are the typical wear items that require periodic inspection.

At what head does the flow drop below one gallon per minute?

At 15 ft of head the pump delivers .9 gpm, which is the first point where flow falls under 1 gpm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.