We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular condensate pump with barbed fittings and motor housing

Hartell Pumps

Hartell Pumps A3X-115 Condensate Pump 1/10 hp 1 gal 115V AC

SKU CH-Q4DD-8Y6VP

Removes condensate up to 30 ft head with 1/8 hp motor and thermal protection on 115V AC

  • Reliable condensate removal with 30 ft maximum head
  • Strong flow up to 6.43 gpm at 1 ft head
  • Motor thermal protection prevents overheating damage
  • Handles hot media up to 212°F safely
  • Plenum-rated design meets air-handling safety standards

HVAC condensate removal pump

The Hartell A3X-115 is a 1/8 hp condensate pump rated for 115V AC operation. It handles media temperatures up to 212 degrees F and carries a plenum-rated construction for HVAC installations. A built-in thermal protector safeguards the motor during extended duty cycles. Both intake and discharge ports use barbed connections for flexible tubing.

Installers needing 30 ft head capacity

This unit suits technicians who require up to 30 feet of head and flow rates of 6.43 gpm at 1 foot, 5.4 gpm at 10 feet, 4.67 gpm at 15 feet or 3.83 gpm at 20 feet. It is not for systems that demand higher discharge pressure or greater flow volume than these rated points. Buyers needing a different voltage or a larger tank capacity should look elsewhere.

1/8 hp motor with thermal protection

The 1/8 horsepower motor includes automatic thermal overload protection to prevent burnout. This single specification determines whether the pump matches the load and safety requirements of the specific HVAC or refrigeration application.

Highlights

  • Reliable condensate removal with 30 ft maximum head
  • Strong flow up to 6.43 gpm at 1 ft head
  • Motor thermal protection prevents overheating damage
  • Handles hot media up to 212°F safely
  • Plenum-rated design meets air-handling safety standards

Specifications

BrandHARTELL

Questions about this item

What size barbed tubing do I need for the intake and discharge connections?

The pump uses barbed fittings on both intake and discharge; match the tubing inside diameter to the barb size shown on the pump body.

Will the 30 ft maximum head handle a vertical lift into an older attic air-handler?

Yes — the pump is rated for 30 ft of head and delivers 3.83 gpm at 20 ft and 4.67 gpm at 15 ft, so typical attic lifts are within range.

How can I confirm the motor thermal protection is operating after installation?

The motor includes built-in thermal protection; if it cycles off under overheating and restarts once cooled, the protection is functioning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.