Harris
Harris KH1030 Two Stage Industrial Air Welding Regulator 0.965-14 125 psig
Two-stage industrial air regulator with 0.965-14 inlet and 125 psig outlet pressure
- MaterialHAWA
- TypeWelding Supplies
- Two-stage design delivers stable outlet pressure
- Brass chrome-plated body resists corrosion in industrial use
- Neoprene diaphragm ensures reliable sealing with industrial air
- CGA 590 inlet fits standard 0.965-14 cylinders
- 125 psig maximum outlet suits precision welding tasks
Two-Stage Industrial Air Regulator
The Harris KH1030 is a two-stage specialty gas regulator built for industrial air service. It reduces cylinder pressure to a controlled outlet maximum of 125 psig for consistent delivery in welding and fabrication tasks.
CGA 590 Inlet with 0.965-14 Thread
The single specification that decides fit is the CGA 590 inlet connection, sized at 0.965"-14 with a female NGO thread. This matches industrial air cylinders using that exact standard; any other cylinder connection will not seal.
Brass Body with 1/4 NPT Male Outlet
The chrome-plated brass body houses a neoprene diaphragm and feeds a 1/4 inch male NPT outlet. It requires a compatible CGA 590 cylinder and downstream hose or manifold with a 1/4 inch female NPT port to complete the gas circuit.
Highlights
- Two-stage design delivers stable outlet pressure
- Brass chrome-plated body resists corrosion in industrial use
- Neoprene diaphragm ensures reliable sealing with industrial air
- CGA 590 inlet fits standard 0.965-14 cylinders
- 125 psig maximum outlet suits precision welding tasks
Specifications
| Brand | HARRIS |
|---|---|
| Material | HAWA |
| Type | Welding Supplies |
Questions about this item
What does the 125 psig outlet pressure mean when I connect it to my torch?
It limits the working pressure delivered to the torch to a maximum of 125 psig, so the flame stays steady even as the cylinder empties.
How does the CGA 590 inlet with 0.965-14 threads affect which cylinder I can use?
The CGA 590 nut with 0.965-14 female threads mates only with industrial-air cylinders that have the matching male outlet, preventing cross-connection with other gases.
What clearance do I need for the 1/4 in male NPT outlet when I plumb the hose?
The 1/4 in male NPT outlet accepts a standard 1/4 in female NPT fitting, so allow enough space for the fitting and hose bend radius at the regulator body.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
