Harris
Harris D-85 welding mixer 23/64-26 male/female connections
Oxy-fuel torch tip mixer for brazing, heating and welding with 23/64-26 male/female connections
- TypeWelding Parts & Supplies
- Compatible with multiple fuel types including acetylene and propane
- Supports brazing, heating and welding applications
- Male and female 23/64-26 connections for secure fit
- Works with tip series 1390, 1390-N, 23A90 and J-63
- Designed for Harris torch series 85 and tip tube 8593
Harris D-85 Mixer for Oxy-Fuel Torches
The Harris D-85 mixer connects compatible torch series 85 to fuel supplies for brazing, heating and welding tasks. It accepts acetylene, natural gas, propane and propylene. The inlet and outlet both use 23/64-26 male and female threads respectively. This part is aimed at metalworkers who need a replacement mixer for existing Harris equipment.
Interface limits defined by 23/64-26 threads
The mixer only fits torches and tip tubes that share the exact 23/64-26 thread specification. It works with heating tip series 1390-B, 1390-H, 1390-HA and J-63 plus welding and brazing tip series 1390, 1390-N and 23A90. Tip tube 8593 is also compatible. Any torch or tip with a different thread pitch or diameter will not seal correctly.
Mixer series D-85 determines fit
The single specification that decides whether this is the right part is the mixer series D-85 combined with the 23/64-26 male inlet and female outlet. If the torch or tip tube calls for a different mixer series or thread size, this unit will not work. California Proposition 65 warnings apply to chemicals contained in the product.
Highlights
- Compatible with multiple fuel types including acetylene and propane
- Supports brazing, heating and welding applications
- Male and female 23/64-26 connections for secure fit
- Works with tip series 1390, 1390-N, 23A90 and J-63
- Designed for Harris torch series 85 and tip tube 8593
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | HARRIS |
Questions about this item
Which mixer series fits the 85 torch series and 23/64-26 connections?
The D-85 series is built for torch series 85 and uses 23/64-26 male inlet and female outlet threads.
What does the D-85 designation mean when the mixer is installed on a torch?
It identifies a mixer calibrated for acetylene, natural gas, propane and propylene with series 85 torches.
How do the 23/64-26 male and female threads limit what tips or tubes can be attached?
Only tips or tip tubes with matching 23/64-26 threads — such as tube 8593 and series 1390, 23A90, J-63 tips — will seal correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
