We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey nylon braided USB-A to USB-C cable 1.64ft with aluminium alloy connectors

HANNORD

HANNORD USB-A to USB-C Cable 1.64ft USB 3.2 Gen2 10Gbps 60W Grey Nylon Braided

SKU CH-5SAH-6N23M

A USB-A to USB-C cable delivering 10Gbps data transfer and 60W charging in a durable braided design

  • ColorGrey

Cable Length 1.64 Feet

  • Transfers HD movies in seconds with 10Gbps USB 3.2 Gen 2 speed
  • Charges phones and tablets at 60W through the built-in E-Marker chip
  • Survives daily wear with aluminium connectors tested for 10000 plugs and bends
  • Connects docks and external displays to expand your workstation
  • Works with Android Auto, Galaxy, iPad Pro, Pixel and other USB-C devices

USB-A to USB-C Cable for 10 Gbps Data

This cable connects USB-A hosts to USB-C devices at up to 10 Gbps while delivering up to 60 W of power. It is built for users who need fast file transfers and quick charging on phones, tablets, laptops and docking stations. The 1.64 ft length keeps desks tidy without excess slack. An integrated E-Marker chip manages the power negotiation for safe operation.

Thermals Noise and Power Draw in Normal Use

The cable remains cool during typical charging and data sessions because the aluminium alloy housing dissipates heat from the E-Marker chip. No active cooling is present so operation is silent. Power draw matches the attached device up to the 60 W limit and falls to near zero when idle. The nylon braid resists wear from daily plugging and unplugging.

Behaviour Under Sustained Load Rather Than a Short

During extended transfers the 10 Gbps link stays stable thanks to the reinforced connectors tested to 10000 insertion cycles and 10000 bend cycles. Voltage and current remain steady at the negotiated 3 A level without throttling. The construction is not rated for outdoor or industrial environments. Users needing longer reach or higher power delivery should consider other cables.

Highlights

  • Transfers HD movies in seconds with 10Gbps USB 3.2 Gen 2 speed
  • Charges phones and tablets at 60W through the built-in E-Marker chip
  • Survives daily wear with aluminium connectors tested for 10000 plugs and bends
  • Connects docks and external displays to expand your workstation
  • Works with Android Auto, Galaxy, iPad Pro, Pixel and other USB-C devices

Specifications

ColorGrey

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect this 1.64ft USB-A to USB-C cable for 10Gbps transfer?

Plug the USB-A end into a USB 3.2 Gen 2 port on the host and the USB-C end into the device; the E-Marker chip negotiates 10Gbps automatically, but the link drops to USB 3.1 or 3.0 speeds if either port is an older standard.

When will the reinforced connectors or braided jacket need replacement?

The aluminium-alloy connectors and nylon braid are rated for 10000 insertion cycles and 10000 bend cycles; replace the cable once plug retention feels loose or the braid shows fraying near the strain reliefs.

What limits sustained 60W charging or 10Gbps throughput on this cable?

The 60W 3A limit is set by the E-Marker chip and USB 3.2 Gen 2 spec; sustained loads at that level are further constrained by the host port’s thermal throttle and the device’s own charge controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.