We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 2.0 A male to B male cable with magnetic ring, 10 ft

HANNORD

HANNORD USB 2.0 A Male to B Male Cable 10 ft Blue

SKU CH-G7TJ-PJFF1

USB 2.0 Type A to Type B cable connects printers, scanners, Arduino boards and other USB B devices over a 10 ft blue cord with a magnetic ring for stable data transfer

  • ColorBlue

Cable Length 10 Feet

Struck-through versions exist but are not stocked here.

  • USB 2.0 Type A to Type B connects printers and scanners
  • Single magnetic ring keeps data transfer clear and stable
  • 10 ft length gives flexible placement for desktop devices
  • Works with Arduino UNO R3, ATMEGA328P and MEGA2560 boards
  • Compatible with keyboards, cameras, pianos and audio interfaces

Connection Type & Length

This cable provides a USB 2.0 Type A male to Type B male link measuring 10 ft. The blue jacket and single magnetic ring help keep signal transmission clear and stable. It suits printers, scanners, fax machines, servers, monitors, hard disks, keyboards, digital cameras, digital pianos and audio interfaces. Builders needing a direct A-to-B connection for these peripherals will find it fit for purpose.

Suitable Uses & Limits

The lead works with Arduino UNO R3 boards using ATMEGA328P chips and MEGA2560 modules for data sync tasks. It also connects any PC to devices that support a USB B port. Buyers who need a Mini-USB or Micro-USB plug, a longer run than 10 ft, or a USB 3.0 or higher bandwidth should look at other cables.

Deciding Specification

The defining detail is the USB 2.0 Type A male to Type B male connector pairing. Only equipment fitted with a standard USB B receptacle can use this cable. Verify the port on your device before ordering.

Highlights

  • USB 2.0 Type A to Type B connects printers and scanners
  • Single magnetic ring keeps data transfer clear and stable
  • 10 ft length gives flexible placement for desktop devices
  • Works with Arduino UNO R3, ATMEGA328P and MEGA2560 boards
  • Compatible with keyboards, cameras, pianos and audio interfaces

Specifications

ColorBlue

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 10 ft blue cable get warm or draw noticeable power when left connected to a printer all day?

USB 2.0 cables carry only low-voltage data and minimal bus power, so the 10 ft blue lead stays cool and adds no measurable heat or power draw during continuous use.

What port must my computer already have to plug in this USB 2.0 Type A to Type B cable?

Your computer needs a standard USB Type A port; the cable’s Type B end connects to the printer, scanner, Arduino UNO R3, ATMEGA328P or MEGA2560 board.

Will this 10 ft blue cable work reliably with an older USB 1.1 scanner I still use?

Yes — USB 2.0 is backward compatible, so the cable will sync data with legacy USB 1.1 devices such as older scanners, printers or digital cameras.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.