Hangman Products
Hangman Products BCK-25 Gold Double Headed Bear Claw Screw Hanger 25 pk
Anchorless gold screw hangers bore into drywall, plaster or wood without a pilot hole, holding 30 lbs in drywall or 100 lbs in a stud, 25 per pack
- TypeHardware Supplies
- Holds up to 30lbs in drywall without drilling
- Anchors up to 100lbs when driven into a wood stud
- Installs in drywall, plaster or lath with no pilot hole
- Works in concrete, brick or masonry using a 1/8in pilot hole
- Collar fits keyholes, sawtooths, wire and D-rings
Hangman Gold Bear Claw Hanger 25 Pack
The Hangman Gold Bear Claw Hanger is a double-headed, anchorless mounting screw sold in a 25 pack. It is designed for anyone hanging mirrors, pictures or similar wall decor who wants a fastener that works without a separate anchor in drywall, lath, plaster or wood. Installers who prefer a visible collar for keyholes, sawtooths, wire or D-rings will also find it suitable.
Sustained Load Performance
The hanger holds up to 30lbs when driven directly into drywall and up to 100lbs when the screw engages a wood stud behind the wall. These ratings reflect the capacity of the installed fastener under continuous load rather than a brief impact. For concrete, brick or masonry a 1/8" pilot hole is required to achieve reliable holding power.
Installation Notes
No pilot hole, drill or anchor is needed for drywall, lath, plaster or wood; the screw bores in directly. A 1/8" pilot hole is necessary only for concrete, brick or masonry. The exposed collar simplifies alignment for keyhole, sawtooth, wire or D-ring hangers. The pack contains 25 screws; buyers needing a different quantity should look elsewhere.
Highlights
- Holds up to 30lbs in drywall without drilling
- Anchors up to 100lbs when driven into a wood stud
- Installs in drywall, plaster or lath with no pilot hole
- Works in concrete, brick or masonry using a 1/8in pilot hole
- Collar fits keyholes, sawtooths, wire and D-rings
Specifications
| Brand | HANGMAN |
|---|---|
| Type | Hardware Supplies |
Questions about this item
How much weight can each screw hold when driven into drywall without a pilot hole?
Each hanger holds up to 30 lbs in drywall with no pilot hole required.
What tools or anchors must I already have to use these hangers?
No drill, pilot hole or separate anchor is needed for drywall, lath, plaster or wood; only a 1/8" pilot hole is required for concrete, brick or masonry.
Will the exposed collar accept the sawtooth and D-ring hangers already on my frames?
Yes, the collar fits keyholes, sawtooths, wire and D-rings on existing frames.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
