We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Guardian 00373 D-Bolt Anchor Connector, 3 in ring, galvanized and stainless steel

Guardian

Guardian 00373 D-Bolt Anchor Connector 3 in traffic safety equipment

SKU CH-FHKG-4TEMX

A D-bolt anchor connector with a 3 in. ring, 4 in. length, 5,000 lb tensile strength and 420 lb weight capacity meeting ANSI Z 359.1 -07, ANSI A 10.32 -12, OSHA 1910 and OSHA 1926 Subpart M standards

  • MaterialHAWA
  • Galvanized and stainless steel construction resists corrosion
  • Meets ANSI Z 359.1 -07 and ANSI A 10.32 -12 standards
  • Rated for 5,000 lb tensile strength and 420 lb weight capacity
  • Complies with OSHA 1910 and OSHA 1926 Subpart M regulations

Guardian 00373 D-Bolt Anchor Connector

The Guardian 00373 D-Bolt Anchor Connector is a fall-protection anchorage connector designed for workers who need a secure tie-off point on structural steel or concrete. Its three-inch ring diameter and four-inch length meet ANSI Z 359.1 -07, ANSI A 10.32 -12, OSHA 1910 and OSHA 1926 Subpart M requirements for personal fall-arrest systems.

Replaces worn or non-compliant anchors

This connector replaces anchors that no longer meet the 5,000 lb tensile-strength requirement or the 420 lb weight-capacity limit set by current standards. The jump is worth it when an inspection reveals corrosion, deformation or missing certification markings on the existing hardware.

Highlights

  • Galvanized and stainless steel construction resists corrosion
  • Meets ANSI Z 359.1 -07 and ANSI A 10.32 -12 standards
  • Rated for 5,000 lb tensile strength and 420 lb weight capacity
  • Complies with OSHA 1910 and OSHA 1926 Subpart M regulations

Specifications

BrandGUARDIAN
MaterialHAWA

Questions about this item

What diameter hole does the 3 in ring on the Guardian 00373 D-Bolt Anchor Connector require for mounting?

The connector has a 3 in ring diameter and a 4 in overall width; drill a hole that accommodates the 3 in ring and allows the 4 in body to seat flush.

How do you install the Guardian 00373 D-Bolt Anchor Connector, and what step is commonly missed?

Insert the D-bolt through the prepared opening, tighten to the specified torque, then verify the ring sits fully seated; the step often missed is confirming full ring contact before applying any load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.