Guardair
Guardair LZR6507KIT Pistol Grip Air Gun Kit 4 Nozzles
Pistol-grip air gun kit with four straight nozzles in 1, 2, 3 and 6 inch lengths, brass and rubber safety tips, OSHA-compliant at 100 dB and .6 lbf thrust, 1/4 inch female NPT inlet
- TypeAngle, Pitch & Slope Locators
- OSHA compliant pressure for safe operation
- Four interchangeable nozzles (1 in, 2 in, 3 in, 6 in) for versatile reach
- Pistol grip design for comfortable handling
- Focused air flow pattern with 0.6 lbf thrust
- Brass and rubber safety tip nozzles reduce damage risk
Pistol-Grip Air Gun Kit with Four Nozzles
This Guardair kit delivers a focused air stream through a lightweight aluminium body with a pistol-grip handle. Four interchangeable brass and rubber nozzles measuring one, two, three and six inches are included for straight-line cleaning and drying tasks. The 1/4-inch female NPT inlet connects directly to standard shop air lines. OSHA pressure compliance makes it suitable for professional maintenance environments.
Thermals Noise and Power Draw
Compressed-air operation means no motor heat, no electrical draw and no internal moving parts to wear. The only audible output is the 100 dB air rush at the nozzle, which is typical for focused venturi tips. Thrust measures 0.6 lbf, so prolonged use remains manageable without vibration fatigue. Aluminium construction dissipates ambient temperature quickly during continuous blowing cycles.
Upgrade Path and When It Matters
This kit replaces single-tip blow guns that force operators to swap tips manually or tolerate one fixed reach. The four straight nozzles cover tight cavities, medium ducts and longer extensions without tool changes. Shops that standardise on 1/4-inch NPT supply lines gain immediate compatibility. Buyers who need angled or flexible tips should look elsewhere, as every nozzle in this set is straight.
Highlights
- OSHA compliant pressure for safe operation
- Four interchangeable nozzles (1 in, 2 in, 3 in, 6 in) for versatile reach
- Pistol grip design for comfortable handling
- Focused air flow pattern with 0.6 lbf thrust
- Brass and rubber safety tip nozzles reduce damage risk
Specifications
| Brand | Guardair |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
How do I install the 1/4 in NPT air inlet on the Guardair LZR6507KIT and what step gets missed?
Thread the 1/4 in female NPT inlet onto your hose fitting using thread sealant; the step often missed is tightening until the safety tip seats fully to prevent leaks at 100 dB operation.
What maintenance will the four brass and rubber nozzles need over time?
Inspect the 1 in, 2 in, 3 in and 6 in nozzle tips for wear or blockage; replace any tip when the focused air pattern degrades or the Venturi effect drops below 0.6 lbf thrust.
What limit appears first during sustained use of the aluminium body pistol grip?
The 100 dB sound level is the first sustained-use limit; OSHA pressure compliance holds, but hearing protection becomes mandatory before the aluminium body shows heat stress.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
