Guardair
Guardair LZR650048AA Pistol Grip Air Gun 48in Extension
Pistol-grip air gun with 48in extension, brass safety-tip nozzle, 101 dB output, OSHA-compliant, 1/4in NPT inlet
- TypeAngle, Pitch & Slope Locators
- Pistol grip design gives comfortable control
- 48 in extension reaches distant work areas
- OSHA pressure compliant for workplace safety
- 101 dB sound level meets noise standards
- Brass safety tip nozzle focuses air flow
Guardair Pistol Grip Air Gun 48in Extension
This Guardair pistol grip air gun includes a 48in extension for reaching distant work areas. It suits technicians who need focused airflow in tight or elevated spaces. The aluminum body keeps the tool lightweight for extended use.
OSHA Compliant 101 dB Safety Tip Nozzle
The nozzle carries a safety tip and meets OSHA pressure compliance at a measured 101 dB sound level. This single specification confirms the tool is approved for regulated workshop environments. Buyers needing a quieter or non-compliant gun should look elsewhere.
Simple 1/4in NPT Connection Prevents Leaks
The 1/4in female NPT inlet threads onto standard shop air lines without adapters. Brass nozzle tip resists wear from repeated coupling cycles. Over-tightening the inlet can strip the aluminum threads, so hand-tighten plus a quarter turn.
Highlights
- Pistol grip design gives comfortable control
- 48 in extension reaches distant work areas
- OSHA pressure compliant for workplace safety
- 101 dB sound level meets noise standards
- Brass safety tip nozzle focuses air flow
Specifications
| Brand | Guardair |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What does the 48 in extension mean when the gun is connected to an air line?
It adds 48 inches of reach from the pistol grip to the nozzle tip, letting you direct airflow into deep cavities without stretching the hose.
How does the 1/4 in NPT female inlet limit the air supply?
The inlet accepts standard 1/4 inch NPT male fittings, so flow is capped by the coupler and hose diameter you choose.
What clearance is needed to mount the aluminum body on a bench hook?
The straight aluminum body with pistol grip fits any hook or bracket that holds a 1/4 in NPT inlet and clears the 2 in nozzle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
