Guardair
Guardair LZR600060AA Air Gun 1/4 in FNPT Aluminum Gray
Aluminum air gun with safety-tip nozzle, 101 dB output, 1/4 in FNPT inlet, OSHA compliant
- TypeAngle, Pitch & Slope Locators
- Safety tip design meets OSHA pressure compliance
- Focused airflow pattern delivers 1 lbf output thrust
- Aluminum body and nozzle tip resist corrosion
- 101 dB sound level for workshop awareness
- 1/4 in FNPT inlet fits standard air lines
Purpose-Built Air Gun
The Guardair LZR600060AA is a straight-nozzle air gun designed for focused blow-off tasks. Its aluminum body and safety-tip venturi nozzle meet OSHA pressure compliance. The 1/4-inch FNPT inlet connects to standard shop air lines. It suits technicians who need a lightweight, compliant tool for precision cleaning.
Upgrade From Basic Blow Guns
This model replaces simple open-tip guns that exceed OSHA pressure limits or lack a venturi safety tip. The jump is worth it when regulations require a compliant safety tip and a focused airflow pattern. It also suits users moving from plastic-bodied guns to a more durable aluminum construction for daily shop use.
Simple Installation
Connect the 1/4-inch FNPT inlet to a compatible air hose using standard NPT thread sealant. The straight nozzle requires no adjustment. What usually goes wrong is cross-threading the inlet or using an undersized hose that restricts flow and reduces thrust. Verify the supply pressure matches OSHA limits before use.
Highlights
- Safety tip design meets OSHA pressure compliance
- Focused airflow pattern delivers 1 lbf output thrust
- Aluminum body and nozzle tip resist corrosion
- 101 dB sound level for workshop awareness
- 1/4 in FNPT inlet fits standard air lines
Specifications
| Brand | Guardair |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What thread size does the 1/4 in FNPT air inlet require on the supply hose?
The gun has a 1/4 in female NPT inlet, so the hose or fitting must carry a matching 1/4 in male NPT thread.
Which step is most often missed when connecting the air gun to the supply line?
Applying thread sealant or PTFE tape to the 1/4 in NPT connection before tightening prevents leaks that a dry thread will not seal.
What part should be inspected or replaced if the safety tip becomes damaged or the venturi performance drops?
The single included nozzle with its aluminum safety tip and venturi is the serviceable component; replace the nozzle assembly if the tip is deformed or airflow falls off.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
