Guardair
Guardair 5036 Air Gun 3/4 in FNPT Aluminium Silver
Aluminium pistol-grip air gun with a 7 in straight safety-tip nozzle, 101 dB output and OSHA-compliant 7 lbf thrust
- TypeAngle, Pitch & Slope Locators
- Pistol-grip design gives comfortable control during extended use
- Safety-tip nozzle reduces risk of accidental injury
- Quiet Force technology lowers noise to 101 dB
- OSHA-compliant pressure meets workplace safety standards
- Aluminium body and nozzle resist corrosion for long service life
Guardair 5036 Air Gun 3/4 in FNPT
This pistol-grip air gun connects to a 3/4 in FNPT supply and ships with a single 7 in straight aluminium nozzle. The nozzle tip uses a Safety Tip design and Quiet Force airflow to produce a focused pattern. It delivers 7 lbf of thrust at a measured 101 dB sound level while remaining OSHA pressure compliant. The aluminium body keeps the tool light and corrosion resistant.
Upgrade from lower-thrust or non-compliant guns
Replaces blow guns that exceed OSHA pressure limits or lack a focused safety tip. The jump is worth it when a shop needs 7 lbf of thrust in a focused pattern and a verified 101 dB rating for compliance records. The single included nozzle covers the standard straight-blast requirement without extra parts.
Fits 3/4 in FNPT air lines in industrial
Threads directly onto a 3/4 in female NPT fitting so no adapter is required for that port size. The aluminium construction resists shop fluids and reduces fatigue during extended use. The focused airflow pattern clears chips and debris efficiently while the safety tip prevents dead-end pressure buildup.
Highlights
- Pistol-grip design gives comfortable control during extended use
- Safety-tip nozzle reduces risk of accidental injury
- Quiet Force technology lowers noise to 101 dB
- OSHA-compliant pressure meets workplace safety standards
- Aluminium body and nozzle resist corrosion for long service life
Specifications
| Brand | Guardair |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What size female NPT thread does the air inlet use?
The inlet is a 3/4 in FNPT connection, so it threads directly onto a matching male NPT hose or fitting without an adapter.
How is the safety tip nozzle attached, and what mistake should I avoid?
The 7 in straight aluminum nozzle with Quiet Force tip is already installed; do not remove or replace it with a non-safety tip, or the gun will no longer meet OSHA pressure compliance.
When should the nozzle or the gun body be replaced?
Replace the nozzle if the safety tip is deformed, cracked or no longer limits pressure to OSHA levels; replace the aluminum body if threads are stripped, corrosion appears or the pistol grip cracks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
